Announcement

Collapse
No announcement yet.

EP45-UD3P & Q6600 How 2 Overclock ?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    EP45-UD3P & Q6600 How 2 Overclock ?

    I want to ask about one question , i bought it from 2 days nd i want to Overclocking it , here is my component
    1-cpu Q6600
    2-Triton 77 Cooler
    3-VGA XFX geforce 9800 gt
    4-Ram khx8500d2k2/2g (2 kits )
    5-Power 700w

    I Ask For The Most Recommended Setting To Get Best Performance

    Waiting For Ur Reply
    Tags: None
  • #2
    Re: EP45-UD3P & Q6600 How 2 Overclock ?

    Can you please post a link to where you bought your ram, and what speed you want to run your CPU?

    And please post for me what you are using now >>>>

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    [b][u]MB Intelligent Tweaker(M.I.T.)[/u][/b]
Robust Graphics Booster ...............: 
CPU Clock Ratio ..........................: 
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 


[b][u]Clock Chip Control [/u][/b]
[b][u]Standard Clock Control[/u][/b]
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............: Mhz
[B]PCI Express Frequency (Mhz) .........:Set to 100[/B]

C.I.A.2 .................................:[Disabled]


[b][u]Advanced Clock Control [Press Enter][/u][/b]
CPU Clock Drive...........................: <<< 
PCI Express Clock Drive.................: <<< 
CPU Clock Skew (ps)....................: <<< 
MCH Clock Skew (ps)...................: <<< 


[b][u]DRAM Performance Control[/u][/b][u][/u]
[B]Performance Enhance...................: [STANDARD][/B]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: 
Memory Frequency (Mhz) ..............: 
DRAM Timing Selectable ................: [Manual]

[b]Standard Timing Control[/b]
CAS Latency Time........................
tRCD .........................................
tRP'...........................................
tRAS..........................................

[b][u]Advanced Timing Control[/u][/b]
tRRD...........................................
tWTR..........................................
tWR............................................
tRFC...........................................
tRTP...........................................
Command Rate (CMD) ....................:2

[u][b]Driving Strength Profiles[/b][/u][b][/b]
Driving Strength ............................

[b]Channel A[/b]
Static tRead Value.........................:7-10
 tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

[b]Channel B[/b]
Static tRead Value.........................:7-10
 tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

[b][U]Motherboard Voltage Control[/U][/b][U][/U]
Voltage Type.………... Manual
[b]CPU[/b]
CPU Vcore….……….........................:
CPU Termination…..... 1.200V*.......: <<< Leave
CPU PLL…………………....1.500V*.......: <<< Leave
CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above)
CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

[b]MCH/ICH[/b]
MCH Core…………….....1.100V...........: << 
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave

DRAM
DRAM Voltage ……....1.800V............: 
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave

[b][U]Advanced Settings[/U][/b][U][/U]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

[b][U]Integrated Peripherals[/U][/b][U][/U]
Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

    Comment

    • #3
      Re: EP45-UD3P &amp; Q6600 How 2 Overclock ?

      i'll fix the pc 2day , not yet fixed , for the setting u can give me the numbers i want 2 achieve 3 Ghz speed with my q6600 , for memory i bought it from kuwait . not from a site .

      Comment

      • #4
        Re: EP45-UD3P &amp; Q6600 How 2 Overclock ?

        I just wanted to check the voltage warrantied on it. But I found it from your above Model #, sorry I missed that before. Here is the PDF incase you wanted to know >>>
        What Memory is Compatible with my Server, Desktop PC or Laptop Computer? - Kingston Memory Finder - Compatible RAM - Kingston Technology
        http://www.valueram.com/datasheets/KHX8500D2K2_2G.pdf
        Trust Kingston for all of your servers, desktops and laptops memory needs. Kingston DRAM is designed to maximize the performance of a specific computer system. Find memory for your device here.


        Here try this for 3.0Ghz >>>

        Code:
        [b][u]MB Intelligent Tweaker(M.I.T.)[/u][/b]
Robust Graphics Booster ...............: Fast
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 3.0 (2.997)


[b][u]Clock Chip Control [/u][/b]
[b][u]Standard Clock Control[/u][/b]
CPU Host Clock Control..................: [Enabled] 
CPU Host Frequency (Mhz) ............: 333Mhz
[B]PCI Express Frequency (Mhz) .........:Set to 100[/B]

C.I.A.2 .................................:[Disabled]


[b][u]Advanced Clock Control [Press Enter][/u][/b]
CPU Clock Drive...........................: <<< stock
PCI Express Clock Drive.................: <<< stock
CPU Clock Skew (ps)....................: <<< 0
MCH Clock Skew (ps)...................: <<< 50-150


[b][u]DRAM Performance Control[/u][/b][u][/u]
[B]Performance Enhance...................: [STANDARD][/B]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [333] 

System Memory Multiplier ..............: 3.20
Memory Frequency (Mhz) ..............: 1066Mhz
DRAM Timing Selectable ................: [Manual]

[b]Standard Timing Control[/b]
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................15

[b][u]Advanced Timing Control[/u][/b]
tRRD...........................................3-4
tWTR..........................................3-5 (May need 14 for first boot thru)
tWR............................................4-6 (May need 14 for first boot thru)
tRFC...........................................52-62
tRTP...........................................3-5
Command Rate (CMD) ....................:2

[u][b]Driving Strength Profiles[/b][/u][b][/b]
Driving Strength ............................1066 or 1200

[b]Channel A[/b]
Static tRead Value.........................:7-10 For 333 MCH (8-10 for 400 MCH)
 tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

[b]Channel B[/b]
Static tRead Value.........................:7-10 For 333 MCH (8-10 for 400 MCH)
 tRD Phase0 Adjustment...................:<<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
 tRD Phase2 Adjustment .................:Auto
 tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto 
Twr2wr(Different Rank)...................:Auto 
Twr2rd(Different Rank)...................:Auto 
Trd2wr(Same/Diff Rank)..................:Auto 
Dimm1 Clock Skew Control...............:Auto  ps
Dimm2 Clock Skew Control...............:Auto  ps

[b][U]Motherboard Voltage Control[/U][/b][U][/U]
Voltage Type.………... Manual
[b]CPU[/b]
CPU Vcore….……….........................: << CPU Voltage will all be up to your chip, so you will need to set it high at first so you can boot.  Then lower until it wont boot and then go back up a notch or two.  Also, do check with CPU-z what your actual voltage is from what you set in the BIOS to what you get in windows, and keep that in mind when adjusting.  Most P45 boards this difference is about .6

So maybe 1.40 or so for a actual voltage of 1.34 or so for 3.0  All up to your chip, you will have to see what you can use.

CPU Termination…..... 1.200V*.......: <<< 1.2-1.3
CPU PLL…………………....1.500V*.......: <<< Please set to what you see for stock, Auto tends to overvolt this

CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above)
CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above)

[b]MCH/ICH[/b]
MCH Core…………….....1.100V...........: << 1.2-1.3
MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: <<< 1.55-1.6
ICH Core…………...……1.100V............: <<< 1.15-1.3

DRAM
DRAM Voltage ……....1.800V............: 2.1
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave

[b][U]Advanced Settings[/U][/b][U][/U]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC

[b][U]Integrated Peripherals[/U][/b][U][/U]
Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

        Comment

        • #5
          Re: EP45-UD3P &amp; Q6600 How 2 Overclock ?

          Thanks Lsdmeasap , i'll check it 2day

          Comment

          • #6
            Re: EP45-UD3P &amp; Q6600 How 2 Overclock ?

            K, Let me know how you get along

            Comment

            • #7
              Re: EP45-UD3P &amp; Q6600 How 2 Overclock ?

              hi Lsdmeasap i'm just finish now overclocking and here is the result , but i think ram not ok , pls send me ur feedback .



              ImageShack - Hosting :: memoryzs3.jpg

              ImageShack - Hosting :: cpumx7.jpg

              ImageShack - Hosting :: spdyn5.jpg

              Comment

              • #8
                Re: EP45-UD3P &amp; Q6600 How 2 Overclock ?

                Ya, you can likely use 555-15 for that ram, maybe 555-18 at that speed

                Comment

                Previous template Next
                Working...
                X