If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
DONE and NOTHING
Update to 7a ... have pics :D nothing change : no voltage only OK ... same undervoltage ... i see theat undervolt CPU from 1.27v set have 1.22 in win ... only in windows i can see voltage ...
What now ? Tray +5v and up ? :D
Hmm very odd for sure, try +4-5 and see what you get in windows.
CPU Vcore will always be less because of Vdrop, and vdroop
+3v = (Everest) 1.9 -1.94
+4v = (Everest) 1.95-1.98
When start MemTest voltage back down to 1.9 and 1.95
Fanny Ok from bios don't matter is 1.8 or 2.2 everest 1.98 is OK
End I don't see DDR18v like you ... is only DDR OK
Do you live in the US? If so I would call and make them cross-ship to you, so you can be sure you do not get the same board back. I have done this many times
Do you live in the US? If so I would call and make them cross-ship to you, so you can be sure you do not get the same board back. I have done this many times
I wish :D but i'm from Europe ... ROUmania ... anyway 10x for help .
Actually for A-Data Extreme DDR2 1066MHz memory voltages range between 2.1V and 2.3V according to manufacturer site. A-DATA OC Offical Website.
So 2.3V is quite safe, beyond this value is the "red zone".
Comment