GA-X48-DQ6 Overclocking Guide?

[switch8]

Hi all,

i am new to Gigabytes bios and was looking for a nice overclocking guide or bios guide for the X48 DQ6. Mainly i am just wanting to get used to the [+..0.5] voltage system for overclocking my Q9550. I am unsure what the "normal" settings are set at. Also some of the definitions are different, like the (G)MCH (assuming NB voltage). Any help is greatly appreciated. Thanks.

[switch8]

Re: GA-X48-DQ6 Overclocking Guide?

Bump, for help.

[Lsdmeasap]

Re: GA-X48-DQ6 Overclocking Guide?

The guide I pinned is for X48 as well. Normal would be the board stock or the hardware piece itself's stock voltage

Do you need help with any voltage in particular?

[byron3]

Re: GA-X48-DQ6 Overclocking Guide?

What guid sir?du u mean the link on your sinature???
I'm using GA x48 DQ6 too...but slightly new to overclocking...
I bought this board not by using this...
I bought this board for my play ground in overclocking...
Sir can you help me...
or share a link to for a GA x48 DQ6 (only) Overclocking guide?
Thanks for your kind suport...
Gigabyte Rulez ^^

[Lsdmeasap]

Re: GA-X48-DQ6 Overclocking Guide?

The guide is pinned at the top of this section of the forum. Here is the link >>

http://forums.tweaktown.com/f69/gigabyte-x38-p35-p965-ds-dq-s3-overclocking-general-bios-tweaking-guide-26112/

Make a new thread with your full specs if you need some help and we will be glad to offer advise

[byron3]

Re: GA-X48-DQ6 Overclocking Guide?

ok sir....i almost hate gigabyte but then when i found this forum i'm starting to gain back my trust to gigabyte tnx sir...i'll make a new thread....

[Lsdmeasap]

Re: GA-X48-DQ6 Overclocking Guide?

K, good luck with your overclock! Gigabyte is great!!

And I will see your thread and help you if you post one