Announcement

**harry23lim** · 09-18-2008, 05:10 AM

Re: team xtreem dark on ep45 DS3R

now heres the settings i tried in order to maximize my memory to 1066

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster Auto
CPU Frequency 2.4ghz( 266x9)

CPU Host Clock Control [Enabled]
CPU Host Frequency (Mhz) 266 Mhz (FSB)
PCI Express Frequency (Mhz) Set to 100
Advanced Clock Control [Press Enter]
CPU Clock Drive 800
PCI Express Clock Drive 900
CPU Clock Skew (ps) 0
MCH Clock Skew (ps) 0
"
"
DRAM Performance Control
Performance Enhance [STANDARD]
Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS
(G)MCH Frequency Latch 333
System Memory Multiplier 4.0
Memory Frequency (Mhz) 1066MHZ
DRAM Timing Selectable [Manual]
Standard Timing Control
CAS Latency Time ------------5
tRCD -------------------------5
tRP---------------------------5
tRAS------------------------ 15
Advanced Timing Control [Press Enter]
tRRD -------3-7
tWTR ------9-11
tWR -------3-6
tRFC ------38-42
tRTP -------3-5
Command Rate (CMD) (AUTO)
Channel A
Static tRead Value (7-10) 7-12
tRD Phase0 Adjustment Auto
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps
Channel B
Static tRead Value (7-10) 7-12
tRD Phase0 Adjustment Auto
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps

CPU

CPU Vcore <<<<1.4v
CPU Termination <<<1.2v
CPU PLL 1.500V <<< 1.5v
CPU Referen 0.755V <<< Leave
CPU Reference2 0.800V <<< Leave

MCH/ICH

MCH Core 1.100V <<< 1.200v
MCH Reference 0.800V <<< Leave
MCH/DRAM Ref 0.900V <<< Leave
ICH I/O 1.500v<<<<< 1.5v

DRAM

DRAM Voltage 1.800V ----- 2.2v
DRAM Termination 0.900V <<< Leave
Channel A Reference 0.900V <<< Leave
Channel B Reference 0.900V <<< Leave

loop on/off then back to default settings again.i cant get through.

**harry23lim** · 09-18-2008, 05:16 AM

Re: team xtreem dark on ep45 DS3R

3rd settings
MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster Auto
CPU Frequency 32.4GHz ( 266x9)

CPU Host Clock Control [Enabled]
CPU Host Frequency (Mhz) 266 Mhz (FSB)
PCI Express Frequency (Mhz) Set to 100
Advanced Clock Control [Press Enter]
CPU Clock Drive 800
PCI Express Clock Drive 900
CPU Clock Skew (ps) 0
MCH Clock Skew (ps) 0
"
"
DRAM Performance Control
Performance Enhance [STANDARD]
Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS
(G)MCH Frequency Latch (AUTO)
System Memory Multiplier (AUTO)
Memory Frequency (Mhz) 1066MHZ
DRAM Timing Selectable (AUTO)
Standard Timing Control
CAS Latency Time ------------5-5
tRCD -------------------------5 -5
tRP---------------------------5 -5
tRAS------------------------ 15 -18
Advanced Timing Control [Press Enter]
tRRD -------(auto)
tWTR ------(auto)
tWR -------(auto
tRFC ------(auto
tRTP -------(auto
Command Rate (CMD) (AUTO)
Channel A
Static tRead Value (7-10) (auto)
tRD Phase0 Adjustment Auto
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps
Channel B
Static tRead Value (7-10) (auto)
tRD Phase0 Adjustment Auto
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps
Motherboard Voltage Control
Voltage Type Manual

CPU

CPU Vcore <<<<1.4v
CPU Termination <<<1.2v
CPU PLL 1.500V <<< 1.5v
CPU Referen 0.755V <<< Leave
CPU Reference2 0.800V <<< Leave

MCH/ICH

MCH Core 1.100V <<< 1.200v
MCH Reference 0.800V <<< Leave
MCH/DRAM Ref 0.900V <<< Leave
ICH I/O 1.500v<<<<< 1.5v

DRAM

DRAM Voltage 1.800V ----- 2.2v
DRAM Termination 0.900V <<< Leave
Channel A Reference 0.900V <<< Leave
Channel B Reference 0.900V <<< Leave

i cant get through bios but can't continue it hangs a few seconds then automatically restart.

**harry23lim** · 09-18-2008, 05:30 AM

Re: team xtreem dark on ep45 DS3R

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster Auto
CPU Frequency 2.2GHz ( 266x9)

CPU Host Clock Control [Enabled]
CPU Host Frequency (Mhz) 266 Mhz (FSB)
PCI Express Frequency (Mhz) Set to 100
Advanced Clock Control [Press Enter]
CPU Clock Drive 800
PCI Express Clock Drive 900
CPU Clock Skew (ps) 0
MCH Clock Skew (ps) 0
"
"
DRAM Performance Control
Performance Enhance [STANDARD]
Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS
(G)MCH Frequency Latch i tried everything that can reach 1066
System Memory Multiplier i tried everything that can reach 1066
Memory Frequency (Mhz) MHZ 1066
DRAM Timing Selectable---------i tried [Manual] or auto
Standard Timing Control
CAS Latency Time ------------5 -5-6
tRCD -------------------------5 -5-6
tRP---------------------------5 -5-6
tRAS------------------------ 15-18-18
Advanced Timing Control [Press Enter]
tRRD -------3-3-7
tWTR ------9 9-15
tWR -------3 3-15
tRFC ------38 -42-52
tRTP -------3 -6
Command Rate (CMD) (AUTO)
Channel A
Static tRead Value (7-10) 7-14
tRD Phase0 Adjustment Auto -7-14
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps
Channel B
Static tRead Value (7-10) 7-14
tRD Phase0 Adjustment Auto
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps
Motherboard Voltage Control
Voltage Type Manual

CPU

CPU Vcore <<<<1.4v
CPU Termination 1.100v<<<1.3-1.4
CPU PLL 1.500V <<< 1.5v-1.610
CPU Referen 0.760V <<< 0.760

MCH/ICH

MCH Core 1.100V <<< 1.200v -1.300v
MCH Reference 0.760V <<< 0.760
MCH/DRAM Ref 0.900V <<< 0.910
ICH I/O 1.500v<<<<< 1.5v

DRAM

DRAM Voltage 1.800V ----- 2.2-2.3v
DRAM Termination 0.900V <<< 0.910v
Channel A Reference 0.900V <<< 0.910
Channel B Reference 0.900V <<< 0.910

all the settings i did just loop on/off or going to windows loading screen then blank or bsod

**harry23lim** · 09-18-2008, 05:42 AM

Re: team xtreem dark on ep45 DS3R

please give me a hand LSD.

i did set the GTL refs even if i dont undertand it. by the slightest condition example 0.900= 0.910( because there is no 0.900v when you adjust somethin in the main voltages.

and it let me boot and through loading screen or irq post screen but will not let me start windows.

i tried everything i can but i can't let it boot through 1066

i can only boot at ratio below 900mhz even 854mhz is only running @ 333 2.40b

i am having headaches here. trying to figure this out.

i have no other board to test this 1066 memory i just talk to where i sold it from and his at a burial. so i think we are going to replace this rams if its defective or something. but i run memtest and it seem to have no errors detected what the hell.

is it possible that my board is the problem?

**harry23lim** · 09-18-2008, 05:45 AM

Re: team xtreem dark on ep45 DS3R

dont mind the default voltages in the first and second,3rd post because i just copied them on other thread here just for reference.

the last one is the real default voltages in the left side.

i am hoping for a good reply from you LSD T_T. this is so wierd.

**Lsdmeasap** · 09-18-2008, 06:32 AM

Re: team xtreem dark on ep45 DS3R

Try this, I think you are just trying Too many things with all different settings changing at once >>>>>

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster Auto
CPU Frequency 3.2GHz ( 356x9)

CPU Host Clock Control [Enabled]
CPU Host Frequency (Mhz) 356 Mhz (FSB)
PCI Express Frequency (Mhz) Set to 100

Advanced Clock Control [Press Enter]
CPU Clock Drive 800
PCI Express Clock Drive 900
CPU Clock Skew (ps) 0
MCH Clock Skew (ps) 0
"
"
DRAM Performance Control
Performance Enhance [STANDARD]
Extreme Memory Profile (X.M.P.)-------> I CANT SEE THIS IN MY BIOS (Because your ram is likely not SPD Programed)

(G)MCH Frequency Latch 333
System Memory Multiplier 3.20
Memory Frequency (Mhz) 1065MHZ
DRAM Timing Selectable [Manual]

Standard Timing Control
CAS Latency Time ------------5
tRCD -------------------------5
tRP---------------------------5
tRAS------------------------ 15
Advanced Timing Control [Press Enter]

tRRD -------4
tWTR ------9
tWR -------4
tRFC ------42
tRTP -------4
Command Rate (CMD) 2

Channel A
Static tRead Value (7-10) 7-8
tRD Phase0 Adjustment Auto
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps
Channel B
Static tRead Value (7-10) 7-8
tRD Phase0 Adjustment Auto
tRD Phase1 Adjustment Auto
tRD Phase2 Adjustment Auto
tRD Phase3 Adjustment Auto
Trd2rd(Different Rank) Auto
Twr2wr(Different Rank) Auto
Twr2rd(Different Rank) Auto
Trd2wr(Same/Diff Rank) Auto
Dimm1 Clock Skew Control Auto ps
Dimm2 Clock Skew Control Auto ps
Motherboard Voltage Control
Voltage Type Manual

CPU

CPU Vcore <<<<1.43750(stablest because of the v droop) Maybe add a notch or two more, how much droop we talking at load?

CPU Termination <<<1.45 -1.5v {Also Try Auto}
CPU PLL 1.500V <<< 1.5v {Also Try Auto}
CPU Referen 0.755V <<< Leave
CPU Reference2 0.800V <<< Leave

MCH/ICH

MCH Core 1.100V <<< 1.250v
MCH Reference 0.800V <<< Leave
MCH/DRAM Ref 0.900V <<< Leave
ICH I/O 1.500v<<<<< 1.5v

DRAM

DRAM Voltage 1.800V ----- 2.1
DRAM Termination 0.900V <<< Leave
Channel A Reference 0.900V <<< Leave
Channel B Reference 0.900V <<< Leave

**harry23lim** · 09-18-2008, 07:55 AM

Re: team xtreem dark on ep45 DS3R

ill try it out right away.

if i set 333mhz 3.20b 1139mhz will be the results.. its an overclocked memory so you think my ram should handle it?

the vdroop is quite big. but its stable. 1.43750 is detected 1.39~ and up to 1.34xxx at full load on OCCT as it was moving not higher or lower than that.. i think its considered a v drop also.

ill post back after 5 minutes

**harry23lim** · 09-18-2008, 08:34 AM

Re: team xtreem dark on ep45 DS3R

ok i just tried out the settings you gave LSD

failed its not booting at all.

i also tried setting termination, pll voltage to Auto and upping a notch and two more to the cpu V core.

i also tried 8 first on static tread value and then 7 on the next setup.

give me another setting LSD thanks

is it really this hard to let a ddr2 1066 work? or is there something wrong with the devices im using?

**harry23lim** · 09-18-2008, 11:12 PM

Re: team xtreem dark on ep45 DS3R

up

**Lsdmeasap** · 09-18-2008, 11:23 PM

Re: team xtreem dark on ep45 DS3R

Ahh! Please post one table of settings you are now trying that fail. No 1066 ram is not hard to setup, but that ram is not tested to be compatible, so it could be your issues?

I am not sure really though, since I am not there to mess with things. Send me your ram, and I will test over here

**harry23lim** · 09-19-2008, 05:08 AM

Re: team xtreem dark on ep45 DS3R

update thanks.

**harry23lim** · 09-19-2008, 05:16 AM

Re: team xtreem dark on ep45 DS3R

lsd im in the philippines :) it cost more than the price of my rams to ship it from here to there. haha

anyways my last setting i tried is the one you gave me. does not work though

i think compatibility is not an issue because its working. but not @ 1066 lower than 900.

i can boot @ 1:1 ratio but only @ 700+ I can also boot @ 333 @ 5:4 854mhz

i experience booting @ 900+ and 1189 @ 266 latch but after i turn off my pc. and on it again it will not open anymore. loop then back to default and when i tried again that frequency it will not work. there is a time that it works but after i turn off( not restart) back to default again.

**Lsdmeasap** · 09-19-2008, 05:32 AM

Re: team xtreem dark on ep45 DS3R

HAHA, Ya it likely would cost a arm and leg!

266 latch, is that you who I kept telling to stop using it on another thread? If so, Please use 333 or 400 with your testing. Of not ignore this comment, kinda. You do want to be using 333 or 400 though, mainly 400 after 430 or so FSB.

Hmm, Ok try this and see if it helps any at all >>>>

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster Auto
CPU Frequency 3.2GHz ( 356x9)

CPU Host Clock Control [Enabled]
CPU Host Frequency (Mhz) 356 Mhz (FSB)
PCI Express Frequency (Mhz) Set to 100

Advanced Clock Control [Press Enter]
CPU Clock Drive 800
PCI Express Clock Drive 900
CPU Clock Skew (ps) 0
MCH Clock Skew (ps) 0
"
"
DRAM Performance Control
Performance Enhance [STANDARD]

(G)MCH Frequency Latch 333
System Memory Multiplier 3.00
Memory Frequency (Mhz) 1068MHZ

Or

(G)MCH Frequency Latch 400
System Memory Multiplier 2.66
Memory Frequency (Mhz) 946MHZ

5-5-5-15

tRRD -------5
tWTR ------8
tWR -------10
tRFC ------48
tRTP -------6
Command Rate (CMD) 2

DRAM Voltage 1.800V ----- 2.1 -2.2

I see here they do not even need 2.0 to boot at 1066, but all sets for sure are different. So ya never know. You memtested right? I forgot. >>>

Oops! We ran into some problems.

http://forums.hardwarezone.com.sg/showthread.php?t=1992238

I also see here high voltage ruins them quick, so you may want to keep it at 2.0-2.1 and add a fan >>>

4GB Team Xtreem Dark Series DDR2 PC2-8500 (5-5-5-15) Dual Channel kit

http://www.memoryc.com/computermemory/ddr2ram/4gbteamxtreempc28500dark.html

Buy 4GB Team Xtreem Dark Series DDR2 PC2-8500 (5-5-5-15) Dual Channel kit online from MemoryC at low prices. Worldwide shipping, money back guarantee, in-stock guarantee!

**harry23lim** · 09-19-2008, 06:46 AM

Re: team xtreem dark on ep45 DS3R

im not the one that is using 266 latch lol.. i just tested it out. because i can't make this ram work at its specified frequency.

anyways 200 latch will not stick though.. and i can't even use 266 latch

Announcement

team xtreem dark on ep45 DS3R

team xtreem dark on ep45 DS3R

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment