EP45-DS3R data corruption???

[bmarko82]

Hi to All Members! I recently purchased this board but i have some problems with overclocking (was only AMD before).

Here is my specs:
4x1GB Kingmax 1066 Mhz
Core2 E8500
2xSeagate 500GB in RAID 0
1xSamsung 500GB

If I overclock, i get data corruption on the Samsung drive (With no overclock i can unrar the test archive)

Here is my settings:

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................:.0,5
CPU Frequency ...........................: 3,99


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 420 Mhz
PCI Express Frequency (Mhz) .........: 100


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800
PCI Express Clock Drive.................: 900
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<


DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [400]
System Memory Multiplier ..............: 2.00d
Memory Frequency (Mhz) ..............: 880Mhz
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................18

Advanced Timing Control
tRRD...........................................aut o
tWTR..........................................auto
tWR............................................aut o
tRFC...........................................aut o
tRTP...........................................aut o
Command Rate (CMD) ....................auto

Channel A
Static tRead Value.........................:auto
tRD Phase0 Adjustment...................:auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:Auto

Channel B
Static tRead Value.........................:auto
tRD Phase0 Adjustment...................:auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:Auto

Motherboard Voltage ControlCPUMCH/ICHAdvanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]

What is wrong? Please help!

[Lsdmeasap]

Re: EP45-DS3R data corruption???

Try this, PLEASE see CPU Vcore note. That and your ram voltage not being set was the MAIN issues I saw >>>>

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio ..........................: 9
Fine CPU Clock Ratio.....................:.0,5
CPU Frequency ...........................: 3,99


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 420 Mhz
PCI Express Frequency (Mhz) .........: 100


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800
PCI Express Clock Drive.................: 900
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<


DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [400]
System Memory Multiplier ..............: 2.00d
Memory Frequency (Mhz) ..............: 880Mhz
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................18

Advanced Timing Control
tRRD..........................................3-5
tWTR..........................................3-6 (May need 8-12)
tWR............................................4-6 (May need 8-14)
tRFC...........................................52-65
tRTP...........................................3-6
Command Rate (CMD) ....................2

Channel A
Static tRead Value.........................:7-12
tRD Phase0 Adjustment...................:auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:Auto

Channel B
Static tRead Value.........................:7-12
tRD Phase0 Adjustment...................:auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:Auto

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................: [Auto] <<< you overclocking with Auto volts for your CPU? That is not going to work, you are going to HAVE TO find a manual range to enter here

CPU Termination…..... 1.200V*.......: <<< Leave
CPU PLL…………………....1.500V*.......: <<< Leave
CPU Referen.…………....0.755V*.......: <<< Leave
CPU Reference2………,,0.800V*.......:<<< Leave

MCH/ICH
MCH Core…………….....1.100V...........: 1.200 -1.25

MCH Reference….…….0.800V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.550V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave

DRAM
DRAM Voltage ……....1.800V............: 2.0 -2.1V (2.1V is your MAX Warrantied, may or may not be needed)
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]

[bmarko82]

[bmarko82]

Re: EP45-DS3R data corruption???

Switched the E8500 to Q9550

[Lsdmeasap]

Re: EP45-DS3R data corruption???

Ahh, nice upgrade!

How is it coming along now for you?

[bmarko82]

Re: EP45-DS3R data corruption???

Its a nice cpu :) Trying to reach 3.5Ghz...

[Lsdmeasap]

Re: EP45-DS3R data corruption???

You can send me your 8500

Ahh, Hope to get me a Quad Xeon after the holidays. Still unsure if 45nm quad is better then a 65 one though. I use water, so heat wont be so much of a issue.

Did you ever use a 65nm Quad, to tell me your thoughts between that one and the 45nm one you have now?

[bmarko82]

Re: EP45-DS3R data corruption???

I have only amd before. But my friend runs a q6700 in EP45-DS3R (if i remember correctly on 3.0Ghz). We will do some tests for you :)

[Lsdmeasap]

Re: EP45-DS3R data corruption???

Cool! I have seen some tests, but more always help in deciding things like this!