Gigabyte ep45-DS3R

[Lsdmeasap]

Re: Gigabyte ep45-DS3R

Ok most of the above settings are fine for 4x1, but I still need to know the voltage as I showed you a image of how to check.

You will want to make these changes to the above though for 4x1 >>
tRFC...........................................42-48 (52-62)
MCH Core…………….....1.100V...........: << 1.2V - 1.25V

OCCT is a Stress Test

[pterem]

Re: Gigabyte ep45-DS3R

Thanks again for response
I finally figured out all these things are programs I just downloaded cpu-z and found my voltage to be 1.8v however the manufacture says its supposed to be 1.9 for the corsair xms2 ddr2 800, 1024 6400 do will this give you eveything you need? or frequency 270 ,400
cas 4.0 ,5.0
ras to cas 4 ,5
cas precharge 4 ,5
tras 13 ,18
trc 15 22
voltage 1.8 1.8
also I'm coming home from work and finding this thing starts itself in the middle of the day from a shut down no one home to start it!

[Lsdmeasap]

Re: Gigabyte ep45-DS3R

Please post a Image of CPU-z SPD Tab if you want to me to tell you FOR SURE.

But yeah if Corsair page where you bought the ram says 1.9V, or your ram sticker says 1.9V then you will be fine with 1.8

Please post a Image (use Print Screen button and paste to MSPaint if you do not have a screen capture application) as I cannot understand the table you have up there.

Also, please post the settings you are using that fail for you as of now. If you do not want to write all that out, you can post a few images of the MIT page if you like. You will have to take it with your camera though

[pterem]

Re: Gigabyte ep45-DS3R

Thank you for posting
I'll capture the cpu-z and post it. Been really busy at work I'l try for tonight.

Thank you

[Lsdmeasap]

Re: Gigabyte ep45-DS3R

Hmm, what happened with the above second post you removed? I see the issue with the first.

At imageshack, the url you want is the last one, after you click the + sign. The one shown here >>>



Then put the url into img tags >>>

[img]Direct URL of image here[/img]

If you are still unsure of what I mean, quote my post and you should see my coding