If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yes, they will work. Are you SURE they are working sticks of ram? I mean if you just got them can you test them in another system to be sure they are not DOA?
Try putting one stick in slot one and starting the system
You did not post enough info for me to really know what you are asking
No, I meant did you just setup windows or had you been using this PC. Sounds like you have been using it already.
Ok, So you need to change some things in the BIOS for sure.
Can you load the BIOS? If not you will need to put your old sticks back in and make some changes first before using the new sticks.
What CPU do you have, and what speed are you running it at?
This new ram, it is 2x2GB right?
Please put in your old Sticks, and fill in your settings below. And then I will post back new settings for you to set (With the old sticks still in) then you will shut down and put in the new sticks. >>>>
This is Just a template I use to ask people there settings, pay no attention to the numbers in it, replace with yours
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [8]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [450]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ ?
Dram RAS# to CAS# Delay_________ ?
Dram RAS# Precharge Delay_______?
Precharge Delay (tRAS)__________ ?
ACT to ACT Delay (tRRD)_________ ?
Rank Write to READ Delay________ ?
Write to Precharge Delay_________ ?
Refresh to ACT Delay______________ ?
Read to Precharge Delay__________ ?
Static tRead Value_______________ 1-31
Static tRead Phase Adjust________ 1-31
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.300V]
PCI-E OverVoltage Control_ [+0.1V]
FSB OverVoltage Control___ [+0.1V]
(G)MCH OverVoltage Control [+0.1V]
CPU Voltage Control_______ [1.25]
You WILL HAVE TO Answer the questions I posted above for me to help you.
What language do you speak? Maybe I can translate your questions and you wont have to type such short answers. Feel free to post in your language if you need to and I can translate it.
If you speak English, come on man, answer my questions properly so I can help you
Comment