Bios setting for ga-x48-ds4

[K91NE]

OK i just build new system a
Gigabyte GA-X48-DS4
ATI HD4870
INTEL Q9450
CORSAIR XMS2 DHX DDR2 800 (C4)@4-4-4-12
I could not be happier with this setup coming from EVGA 750I 2/EVGA 8800GT graphic cards the ? I have is that this MB overclocks realy different from EVGA board could you guys give me some setting to look for in BIOS as far as MB Intelligent Tweaker
Robust graphic booster-what does this do and what should it be set to
Proformance Enhance-?
CPU/PCIEX clock driver control-?
CPU Skew control-?
(G)MCH Clock skew-?
(G)MCH OverVoltage-?
Also is there any other setting in other BIOS tabs that help with proformance and/or overclocking Thx for the help i have look all over internet and cant find much for this board.Also were do i find NB temp seems like this is a problem with X48/X38 boards.I have ET5pro installed but do not see NB teamp

[Lsdmeasap]

Re: Bios setting for ga-x48-ds4

Robust graphic booster-what does this do and what should it be set to.
This just allows more bandwidth for your GFX card in the PCI bus, which you never saturate anyway so it doesn't really matter. Any setting is just about the same


Proformance Enhance-STANDARD

CPU/PCIEX clock driver control-Leave

CPU Skew control-leave

(G)MCH Clock skew- Leave

(G)MCH OverVoltage-Add +.5 for 2x1GB and +1.-.15 for 2x2gb


All overclocking is done in the MIT section. Please lock your PCI Express Freq to 100 now before you forget and start overclocking

System/motherboard is the NB temps in many apps. ET shows it as system

[prichina]

Re: Bios setting for ga-x48-ds4

so ,i have ddr2 800 Micron (2x2) ,so how should i know what my timing is? maybe is 4-4-4-12 ? so this settings for voltage are just for 4-4-4-12 ?

[Lsdmeasap]

Re: Bios setting for ga-x48-ds4

You can check your voltages and timings using CPU-z, look in the SPD Tab >>>
CPUID

Voltages and timings vary widely for memory, so you would need to check to be sure.

What model # is on your memory sticker?