I just got a new system <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
<o:p></o:p>
e7200<o:p></o:p>
GA-EP45-DS3R<o:p></o:p>
2gb of Crucial Ballistix BL12864aa1065 (1066 555-12 2.2v)<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
Right now I have the system running at 333 FSB with 9.5 multi for 3.16 on the CPU and i am running the system memory multipler at 2.4b for 800mhz<o:p></o:p>
<o:p></o:p>
With these settings the system is rock solid and pretty cool (53 at max load in Prime 95) with everything on auto in the bios.<o:p></o:p>
<o:p></o:p>
When I try to push the system to 400 fsb that’s when everything starts to get sticky<o:p></o:p>
<o:p></o:p>
Prime95 will run sometimes with errors and sometimes without. I have run memtest on my ram with no errors. I have tried undeclocking the cpu with x6 muti and I still have errors in prime95 SOMETIMES. <o:p></o:p>
<o:p></o:p>
I'd love to get a stable 400 FSB so I could push my CPU a little bit more. I’d also love to run the ram @ the 1066 but even with the timings set and Voltage set to 2.2 (it’s purple in the bios yikes!) I’m still having the same problems.<o:p></o:p>
I've also been reading a lot about the overall screwy-ness of the bios on this board and all the p45 advanced options.<o:p></o:p>
<o:p></o:p>
any ideas?<o:p></o:p>
<o:p></o:p>
thanks in advance!!<o:p></o:p>
<o:p></o:p>
e7200<o:p></o:p>
GA-EP45-DS3R<o:p></o:p>
2gb of Crucial Ballistix BL12864aa1065 (1066 555-12 2.2v)<o:p></o:p>
<o:p></o:p>
<o:p></o:p>
Right now I have the system running at 333 FSB with 9.5 multi for 3.16 on the CPU and i am running the system memory multipler at 2.4b for 800mhz<o:p></o:p>
<o:p></o:p>
With these settings the system is rock solid and pretty cool (53 at max load in Prime 95) with everything on auto in the bios.<o:p></o:p>
<o:p></o:p>
When I try to push the system to 400 fsb that’s when everything starts to get sticky<o:p></o:p>
<o:p></o:p>
Prime95 will run sometimes with errors and sometimes without. I have run memtest on my ram with no errors. I have tried undeclocking the cpu with x6 muti and I still have errors in prime95 SOMETIMES. <o:p></o:p>
<o:p></o:p>
I'd love to get a stable 400 FSB so I could push my CPU a little bit more. I’d also love to run the ram @ the 1066 but even with the timings set and Voltage set to 2.2 (it’s purple in the bios yikes!) I’m still having the same problems.<o:p></o:p>
I've also been reading a lot about the overall screwy-ness of the bios on this board and all the p45 advanced options.<o:p></o:p>
<o:p></o:p>
any ideas?<o:p></o:p>
<o:p></o:p>
thanks in advance!!<o:p></o:p>
Comment