EP35 DS3R / system perfomence setting

[ak47mega]

sorry My English bad..

I use EP35-DS3R (2.1)
this use one problem
motherboard bios menu --- performance setting use F2 now version
but no use (ex-- F3E, F3F ,F3h ,F3M)
mothetboard setting key standard and turbo and extreme 3 setting use banchmark figure same
F2 mode RAM setting is low formance but trubo mode and extrime mode is high formance
but overclock mode use standard mode not good I think Gigabyte mainboard ram formace not good standard mode
F2 after bios F3E, F3F ,F3h ,F3M no operation is important
everest ram banch red formance -1000 low Latency figure if (turbo setting ) 59 ns ------->66ns low
bios resetup no exchange F2 ---> F3F , F3H ,F3M

[puttapoom]

Re: EP35 DS3R / system perfomence setting

Please Give me Link Bios F3M

[Lsdmeasap]

Re: EP35 DS3R / system perfomence setting

If you are overclocking you want that setting always on standard.

If you are asking something else I do not understand, what language do you speak?

[Toadeater]

Re: EP35 DS3R / system perfomence setting

Where did you get all those BIOSes!? Are they in English?

AFAIK the only major thing the Performance setting does is adjust tRD; possibly some other RAM timings. Adjust Static tRead Value (tRD) and your RAM timings manually.

[ak47mega]

Re: EP35 DS3R / system perfomence setting

It adds to the text and other these of the result value are presumed to the cause.

All Bios setting prices do one. (equal Turbo set)
2160 [email protected] (8x400) st2 ddr2 800@960 (ver F2 Safety has already been verified.)

Only 'Bios' version is different by 'F2, F3F, and F3H and F3M'.

ram reading benchmark result F2 > F3F(-1000),F3H(-1000),F3M(-1000)

Though it guesses
performance Level = 6 = turbo / Performance Level = 9 = standard(?)

use Everest ultimate v4.50.1429 beta

[Toadeater]

Re: EP35 DS3R / system perfomence setting

Set Static tRead Value manually and see if they change.