GA-MA-770-DS3 SATA Conflict?

[josephezell]

Re: GA-MA770-DS3 SATA Conflict?

Ya, if you HAVE to I would get the add in card, no point in going backwards in DVD tech!

Have you tried it on all your other SATA ports and still have the same issues?

Thanks for the recomendation. Yes, I have tryed that.

On the board, the physical setup is:

SATAII1 - SATAII0
SATAII3 - SATAII2

I have the two hard drives are on 0 and 2. The DVD is on 1.

The reason the two HDDs are on 0 and 2, is it's the only way they would show as MAS 1 and MAS 2 in the RAID configuration.

Surely, putting the HDDs on 0 and 1 would not make a difference ... would it? (and don't call me Shirley)

Joe

[Lsdmeasap]

Re: GA-MA-770-DS3 SATA Conflict?

It could, but you may need to redo the raid array? DO you not have purple ports on your board as well as orange/yellow? If so you could make your raid on the purple GA/J.Micron ports and use the yellow/orange for the DVD player and see if that works better

[josephezell]

Re: GA-MA-770-DS3 SATA Conflict?

Nope! Mine are all yellow.



The 4 SATA sockets are toward the botton of the picture. The yellow block.

[North1]

Re: GA-MA-770-DS3 SATA Conflict?

Same MB with the same problem. I was wondering which SATA card you purchased and if it fixed the issue? TIA.

[josephezell]

Re: GA-MA-770-DS3 SATA Conflict?

North1,

See THIS POST for what cleared up all my issues. Yep, one simple settings and I was cookin' with gas! :)

Joe