Announcement

Collapse
No announcement yet.

Resetting OC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Resetting OC

    My CPU defaults back to 1.8GHz around 1 out of every 10 reboot... but why? I can game for hours without a hitch at 3GHz, and I know the OC is stable. The mobo is practically new.

    Temps using either geminII or Freezer 7 Pro (both have similar results):
    Early to Mid 50's Idle
    Mid-late 60's Load

    More info:
    C2D E4300 @ 3GHz
    Gigabyte P35-DS3L
    8800GT 512MB
    2GB Ballistix DDR-800
    WD Raptor X
    CoolerMaster 690

    Specs in sig... thanks in advace!



    Last edited by StinkyMojo; 04-21-2008, 11:37 PM.

  • #2
    Re: Resetting OC

    No siggy!

    Are you sure it is stable? What is your MIT settings? Sounds like you are 95% stable if it only does it every so often, probably just a small voltage bump or a timing change is needed


    Copy and paste back your settings, add or remove any you have or dont have as far as settings go

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [8]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [450]
    PCI Express Frequency (Mhz)_______ [102]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]
    DRAM Timing Selectable_______ SPD __ [Manual]

    CAS Latency Time________________4
    Dram RAS# to CAS# Delay_________4
    Dram RAS# Precharge Delay_______4
    Precharge Delay (tRAS)__________ 12
    ACT to ACT Delay (tRRD)_________ ?
    Rank Write to READ Delay________ ?
    Write to Precharge Delay_________ ?
    Refresh to ACT Delay______________ ?
    Read to Precharge Delay__________ ?
    Static tRead Value_______________ 1-31
    Static tRead Phase Adjust________ 1-31

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.25]

    Comment

    Working...
    X