ga-945pl ds3 bios crash

[Arkadij]

Hi
I've got problem with bios. It starts after restart that was made because of updating bios by tool @bios.
Now my pc only show black screen with this:
Award Boot Block v1.0
Scannig bios image on hard drive
It also show scannig floopy disk, if i have connectet one to pc
If Ipoot floopy disk, there is respond, it's looking for bios on floopy, but after about 30s, it's stop and only think i can see is ligth from diode.
If HDD is connectet its looking for bios also, but it cant find it, I left my pc for almost 3 hours and nothing happens.
Please help me. I wondering if there is software way to solve this problem.
Maybe if I load bios to my hdd on another pc,it will work?
Or maybe boot floopy disk that i make is wrong? (i formated it on WinXP, and then extract files with bios, flash and autoexe.bat, on it)
Is there any way to use Virtual Dual Bios?
Please help nad thanks for any respond
P.S. My english is terrible, so please forgive me

[Lsdmeasap]

Re: ga-945pl ds3 bios crash

Just put the bios file without extraction or batch file onto a formatted floppy

You may need RMA as I do not think you can simply put BIOS on hard drive, but you can try on a different PC. Put it on a Fat32 partition on the primary boot drive and then put that hard drive back in your pc and try again.

Sounds like bad flash = RMA

[Arkadij]

Re: ga-945pl ds3 bios crash

I've tried both metod and with both I've get nothing.
I've decided to use RMA
Thanks for help.

[Lsdmeasap]

Re: ga-945pl ds3 bios crash

Sorry about your troubles

Next time if you can avoid a flash of the bios within windows.