PCI Latency Timer (CLK) Clock Settings + MCH/NB Voltage Values Request

[Merman]

Re: PCI Latency Timer (CLK) Clock Settings + MCH/NB Voltage Values Request

How about at least knowing the default volt values for the P-35 motherboards or does that vary?

[Lsdmeasap]

The FSB voltage is a bit trickier, per Intel specs:

GTL+ Gunning Transceiver Logic signaling technology. Implements a voltage level as
defined by VTT of 1.2 V.

and you need to read this to understand what is really going on,
Adjusting A/GTL+ Levels for Increased FSB Signaling Margins and Overclocking - The Tech Repository Forums

and so who knows what the manuf has done, Typically you dont want to mess with this unless as a last resort, it causes more harm than good and you probally would only then want to increase it one bump in value.


Technicls specs for Intel chipsets are found, wait for it, wait... wait...
on Intel.com.

But yes, at better answer from GA would be more helpful

[Ricasete]

[Lsdmeasap]

Re: PCI Latency Timer (CLK) Clock Settings + MCH/NB Voltage Values Request

Now just remeber, those are the intel specs. That does not mean GA followed them to the letter, but probably pretty close.

Hey, I'd take you up on that too!