GA-P35C-DS3R problems

[aggeluska]

Re: GA-P35C-DS3R problems

Advanced CMOS features

hdd smart [diasbled]
limit cpuid max to 3 [disabled]
no-execute memory protect enabled
cpu enhanced halt enabled
cpu thermal monitar 2 disabled
cpu eist fuction disabled
virtualization technology enabled
full screen logo show enabled
init dispaly first [pci]

integrate peripherals
legacy usb enabled

power managment setup

suspend type [S3(str)]
soft-off by PWR-BTTN instant-off
PME event wake up enabled
power on by ring enabled
resume by alarm disabled
HPET support enabled
HPET mode 32bit
power on by mouse disabled
power on by keyboard disabled
ac back fuction soft-off


pc health status

reset case oopen status disabled
cpu warning temperature disabled
cpu fan fail warning disabled
system fan2 fail warning disabled
power fan fail warning disabled
system fan1 fail wanring disabled
cpu smart fan control enabled

MB intelligence tweaker

robust graphics booster fast
cpu clock ratio 7x
fine cpu clock ratio +0.5
cpu host clock control disabled
pci express frequency 100
cia2 disabled
perfomance enhance standart
system memory multiplier 2,40
dram time selectable manual
cas latency time 5
dram rash to cas delay 5
dram rash precharge 5
precharge delay 15
act to act delay 3
rank to read delay 4
write to percharge delay 5
refresh to act delay 52
read to precharge delay 3
static tread value 8
static tread phase adjust auto
system voltage control manual
ddr2/ddr3 overvoltage controll +0,5V
fsb overvoltage control normal
pci overvoltage control normal
MCH overvoltage control +0,2v
cpu vooltage control normal




those are my specs

[Lsdmeasap]

Re: GA-P35C-DS3R problems

What's going on here?

Those are BIOS settings, please give us your full specs such as memory model or a link, BIOS version used, ect.

And explain your issue so we can know what you need help with

[aggeluska]

Re: GA-P35C-DS3R problems

cpu q9450

ram 2x2gb mushkin 800mhz(u have link in my previous posts)

hitachi hard disk

9600gt graphic card

l&c 600w psu

my bios version is f3 i dont know which i had befoer that.the default i guess :P

here is my issue ,my pc cant boot,when it shows the windows logo and loading , in the half of the loading it just re-boots and re-boots and again and this continiues untill forever :s.....

[Lsdmeasap]

Re: GA-P35C-DS3R problems

So you updated the BIOS or what?

Did you have AHCI set before in the BIOS and you don't now? Sounds like you need to set ACHI or set IDE, whichever you had before if you udpated the BIOS and this is when the issue started.

What Model is your Mushkins, I don't know what post you are referring to