If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
That is why I went to setting the cpu voltage to Manual - the cpu temp went over 65C under load. Like I said above, the max voltage I see under load with the Manual setting is ~1.288V and the max cpu temp after running prime95 (4-cores, 8 workers) for several hours is 62C. I also have Load-Line Calibration set to Ultra High and Phase Control and Duty Control set to Extreme.
Hi Ken, you think this settings are better??
Asus PZ68-V Pro/Gen3
CPU INtel i7 2700k (4.5 ghz). Air Cooling
Phanteks tc-14 PE- 3 fans
SSD OCZ VERTEX 4- 128 gb Win 10 x64
1x 150 Gb HD Velociraptor
1x300 GB HD Velociraptor
1x500 GB W. Digital
2x4GB Samsung 32nm 2133. 9-10-10-28 1T.VDRAM 1.55 - VCCIO 1.05
PowerColor HD-7770
Sound Blaster X-FI Extreme Music
PSU. 750w Thermaltake
Dimastech Benchtable
Samsung LPS 27" S27D850T https://www.facebook.com/media/set/?...4213100&type=3
Works for me. I spent a lot of time several months ago when I purchased P8Z68 V-Pro/2600K trying different 4.5 GHz overclock settings. The 1.28V manual setting seemed to be the best I could do at the time to get a very stable system that did not generate excessive cpu temps under load. I problably could run with a little less cpu voltage but have not taken the time to find the optimal settings. I have been chasing too many other "minor" issues like: BIOS updates and BIOS reported cpu temp versus CoreTemp, AISuite unable to uninstall or update properly, the Intel 82579V wake up issue, Nvidia/Realtek Audio conflict, USB 3.0/Corsair Case problems, Lucid Virtu/Quick Sync/Cuda issues and the list goes on. It would be nice if this forum could get an active crew working on the ASUS stuff. Trying to get anything resolved on the ASUS Forum is next to impossible. ProfJim where are you!
those temps i quoted were with intel burn test 10runs on maximum,prime95 doesnt get as hot,never had any issues with mine s3 sleep/resume works fine havnt used lucid/usb3 though
plus you never said what wei score you get with your ram? just curious,and i like my cpu voltage to drop when idle hence using offset
Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
W7 says the memory is a 7.8 for whatever that's worth. I'm using a Gigabit Ethernet wired system for my home network and the Intel Ethernet Chip (82579V) likes to throw a warning in the Event Log when the system wakes up from S3 state.
W7 says the memory is a 7.8 for whatever that's worth. I'm using a Gigabit Ethernet wired system for my home network and the Intel Ethernet Chip (82579V) likes to throw a warning in the Event Log when the system wakes up from S3 state.
i found if you disable memory remap in the bios you get full 7.9 score in windows,if its enabled it will only score 7.8 for some reason
Gigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
A new preoblem start yesterday. With any reason on my first boot in the morning , I get this mensage" read disk error" ... with no Win loading of course. I enter in the bios, I only check all, ( all seems ok) and once I reboot all works fine ( two days with this history) . Any idea??
PS: Vcore under prime95 and CPU-Z= 1.336 to some picks 1.344
Comment