Constant rebooting after replacing CPU with 13700K

[lodo]

There was this configuration:
Asrock Z790 PG Riptide (BIOS 10.01, 11.07, 12.05)
Intel i5-13600KF
Palit RTX 4070 Ti GameRock Classic (NED4070T019K9-1046G)
Thermaltake PF3 850W PSU
Everything worked great.

After changing the processor to Intel i7-13700K
After logging into Windows, the computer reboots in less than a minute.
The effect is permanent.
It works in safe mode. Uninstalled the nVidia graphics driver - everything works, before installing the nVidia driver (tried several different versions)

I tried to install a clean Windows 11. Before installing with the nVidia driver, everything worked fine.
The processor passes tests in OCCT.
As soon as I install the nVidia graphics driver (or Windows downloads it itself), after 5-30 seconds the computer reboots.

I tried resetting the settings in the BIOS, disabling IGPU - no result.

Minidump has the following errors:
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: ffffda072afd8050, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8077adef600, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

VIDEO_TDR_CONTEXT: dt dxgkrnl!_TDR_RECOVERY_CONTEXT ffffda072afd8050
Symbol dxgkrnl!_TDR_RECOVERY_CONTEXT not found.

FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys

As a result, I returned the i5-13600KF back, everything works with it. Apparently there is some kind of conflict with IGPU.

With another 13700K processor, same thing.
What else can we try??

[lodo]

I installed i5-14600K - the problem repeated itself.
In BIOS in Advanced Chipset\Configuration:
Set PCIE1 Link Speed? [Auto] - freezes and reboots
Set PCIE1 Link Speed? [Gen1] - works
Set PCIE1 Link Speed? [Gen2] - works
Set PCIE1 Link Speed? [Gen3] - works
Set PCIE1 Link Speed ?[Gen4] - works

Installed i7-13700K - the problem repeated:
Set PCIE1 Link Speed ?[Auto] - freezes and reboots
Set PCIE1 Link Speed? [Gen1] - works
Set PCIE1 Link Speed? [Gen2] - freezes and reboots
Set PCIE1 Link Speed? [Gen3] - freezes and reboots
Set PCIE1 Link Speed? [Gen4] - freezes and reboots

I installed a simpler video card - Palit RTX 4060Ti JETSTREAM 16GB (NE6406T019T1-1061J).
Everything works with it, PCIE1 Link Speed ?[Auto], and [Gen4] (Only this video card is PCIE x8, not x16 like mine)

I installed my video card in another PC with this config:
Asrock Z690M PG Riptide/D5
Intel i7-13700K
Everything works, tests pass.?

[Mr.Tweak]

Testing