I have an ASRock H77M mother board with the ASRock CIR dongle. This is mounted on an HTPC which I power on and off via my Harmony remote. I had an OS/front end call Openelec loaded on the machine, and the remote was working perfectly. However due to limitations of the software, I loaded Win 7 PRO and Kodi. The HTPC stills turns on and boots up with the command from the remote, however It appears to go into sleep mode rather then the off state on the turn off command. Can someone help me out here?
Announcement
Collapse
No announcement yet.
CIR not working correctly
Collapse
X
-
Re: CIR not working correctly
That's a good question...and is the same thing I get. Have you tried programming a normal Windows shut down in your Harmony? Seems that would be better than a cold shut down anyway.
I was going to set up my Harmony remote for my HTPC a long time ago but instead I'm still using the Asrock remote...Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
HTPC: Z68 Pro3 M / 2105
SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
SOLD:Z87X-UD5H /4770K
-
Re: CIR not working correctly
After some testing it appears the in Windows 7 there are two power buttons. One for power and the other for sleep. It appears that when win 7 is up and running the IR code for power toggle is received by the eHome driver and is configured to activate the "Sleep" button. The Sleep button can be set to perform one of three actions: Nothing, Sleep and Hibernate. However it appears that the IR code mapping in eHome can be changed by editing the registry. This will be my next change.
Comment
-
Re: CIR not working correctly
Good luck!Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
HTPC: Z68 Pro3 M / 2105
SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
SOLD:Z87X-UD5H /4770K
Comment
Comment