Hello all.
I am having issues with Fan speeds being applied with my asrock motherboard....... I have the fan profiles set to Performance mode in the bios... but even when they're set to 'custom' it will not even apply this properly... if at all.
I am using a Noctua NH D15 cpu cooler.... the max fan speed is 1500RPM.... there are 2 PWM fans connected via adapter to the single CPU fan header next to the ram modules.... (4pin header)
I am running stock cpu speed 4.0ghz with turbo boosting to 4.4 when required approx 1.263 volts @ 4.4.
If I start the computer and for example do a prime95 and run maximum heat into the CPU the temp will jump to around 80 degrees and then slowly start climbing up.. but the CPU fan speed jumps up to 1080RPM and will not go any higher then this...... Also note I have seen it a few times sit at only 480 RPM (idle speed) regardless of temperatures........ this made my cpu temp around 90 degrees playing BF4 the other week.....
If I go into Fan Tastic Tuning utility in F-Stream and set a custom fan profile and click Apply (setting MAX RPM to hit after 60degrees) then As soon as the CPU hits over 60 degrees my fans go to 1500RPM - This is how it is supposed to work!!!!
I then click the 'auto apply when program starts' and have F-Stream set to auto run on windows startup...... it still goes back to the initial problem will not go above 1080 rpm even though in fantasitc tuning it is set to go max rpm after 60 degrees... and the auto apply on start up is ticked... it just WILL NOT apply it automatically on system startup/f stream start up...
but if I boot up the computer open fantastic tuning and click the apply button it magically goes to 1500 RPM again.
Q - why do I manually have to click the 'Apply' button in Fantastic Tuning everytime I start up windows? Why doesn't the "Auto apply when program start" button work properly? Is this a bug in the program? it's very annoying because if I forget to press apply my fan speed will not go above 1080rpm and Ive seen it for whatever reason stay on idle speeds approx 500rpm - Even under full load......
,
My last motherbaord was a Asrock Z77 Extreme4 and it used a different tuning utility and a different style of Fan controller software... and this software worked MUCH better then F-Stream...... - I tried to download and use this but it wont work I guess z77 isnt compatible with Z97 stuff.
Please someone help... is there a fix for this? am I doing something wrong?
other info:
bios version 1.7
Z97x killer
noctua nh d15
i7 4790k
fan speed set to performance in bios (have tried custom)
thanks
I am having issues with Fan speeds being applied with my asrock motherboard....... I have the fan profiles set to Performance mode in the bios... but even when they're set to 'custom' it will not even apply this properly... if at all.
I am using a Noctua NH D15 cpu cooler.... the max fan speed is 1500RPM.... there are 2 PWM fans connected via adapter to the single CPU fan header next to the ram modules.... (4pin header)
I am running stock cpu speed 4.0ghz with turbo boosting to 4.4 when required approx 1.263 volts @ 4.4.
If I start the computer and for example do a prime95 and run maximum heat into the CPU the temp will jump to around 80 degrees and then slowly start climbing up.. but the CPU fan speed jumps up to 1080RPM and will not go any higher then this...... Also note I have seen it a few times sit at only 480 RPM (idle speed) regardless of temperatures........ this made my cpu temp around 90 degrees playing BF4 the other week.....
If I go into Fan Tastic Tuning utility in F-Stream and set a custom fan profile and click Apply (setting MAX RPM to hit after 60degrees) then As soon as the CPU hits over 60 degrees my fans go to 1500RPM - This is how it is supposed to work!!!!
I then click the 'auto apply when program starts' and have F-Stream set to auto run on windows startup...... it still goes back to the initial problem will not go above 1080 rpm even though in fantasitc tuning it is set to go max rpm after 60 degrees... and the auto apply on start up is ticked... it just WILL NOT apply it automatically on system startup/f stream start up...
but if I boot up the computer open fantastic tuning and click the apply button it magically goes to 1500 RPM again.
Q - why do I manually have to click the 'Apply' button in Fantastic Tuning everytime I start up windows? Why doesn't the "Auto apply when program start" button work properly? Is this a bug in the program? it's very annoying because if I forget to press apply my fan speed will not go above 1080rpm and Ive seen it for whatever reason stay on idle speeds approx 500rpm - Even under full load......
,
My last motherbaord was a Asrock Z77 Extreme4 and it used a different tuning utility and a different style of Fan controller software... and this software worked MUCH better then F-Stream...... - I tried to download and use this but it wont work I guess z77 isnt compatible with Z97 stuff.
Please someone help... is there a fix for this? am I doing something wrong?
other info:
bios version 1.7
Z97x killer
noctua nh d15
i7 4790k
fan speed set to performance in bios (have tried custom)
thanks
Comment