ASRock H81 Pro BTC Question

[Drhiggins]

So I get a warning screen after resetting CMOS (Bios P 1.50) that says "Warning be sure both 4 pin Molex are connected"
Ok, is this an actual detection feature of the board that's telling me something is wrong on the board?
Or is it just a per-programed warning screen reminder?

I have both 4 pin Molex connectors plugged into the board. Also have the 8 pin and ATX plugged in as well.

Need to know if I have a bad board or is this just a heads up message?

Any help is appreciated.

[parsec]

Re: ASRock H81 Pro BTC Question

That message must be a pre-programmed message, given what is shown in the overview for this board.



Note that the above states you may use only one four pin molex connector in the jack closest to the PCIe slots if you are unable to supply two molex power connectors.

If you only see the message after clearing the BIOS, that tells me it is just a heads up message.