Hi. So I've basically replaced my old motherboard and CPU with a new AsRock Z77 Extreme6 and intel i7 3770k. My rest of the specs are as follows
Corsair RM750 Fully Modular power supply
16GB (4x4GB) Corsair DDR3 Vengeance
4GB EVGA GTX 670 FTW + Backplate
2TB Seagate ST2000DM001
So the problem is that, I installed those 4 rams into the slots, the error number panel on the motherboard does it's thing and comes back on which keeps the PC from going passed the "Asrock" screen. I've tried and tested all of the sockets and all of the RAM and they all work. Except for when I put all of them in at the same time. At the moment, it's running 4x3 just fine but 4x4 it won't go past the "asrock" screen. It keeps refreshing the memory or something. Here's a video of the problem. It doesn't display any error.
https://www.youtube.com/watch?v=P2I5O8ak7nA - Here's a video of the problem.
Corsair RM750 Fully Modular power supply
16GB (4x4GB) Corsair DDR3 Vengeance
4GB EVGA GTX 670 FTW + Backplate
2TB Seagate ST2000DM001
So the problem is that, I installed those 4 rams into the slots, the error number panel on the motherboard does it's thing and comes back on which keeps the PC from going passed the "Asrock" screen. I've tried and tested all of the sockets and all of the RAM and they all work. Except for when I put all of them in at the same time. At the moment, it's running 4x3 just fine but 4x4 it won't go past the "asrock" screen. It keeps refreshing the memory or something. Here's a video of the problem. It doesn't display any error.
https://www.youtube.com/watch?v=P2I5O8ak7nA - Here's a video of the problem.
Comment