need help in resetting bios settings

[hassenesoua]

hi everyone
i bought today evga GT 630 2gb ddr3 with a vga-dvi adapter because my screen doesn't support dvi type.

upload a picture
the problem is my adapter seems isn't working (i tried it with an adapter of a friend and worked) and i putted in bios settings to use pci express as primary video card and the card isn't working because of that adpater.. i'm having a black screen on my screen and nothing happens.. is there any solution to reset that primary video card from pci express to onboard ?
my mother board is Asrock h61m-vs
thanks

[parsec]

Re: need help in resetting bios settings

You must remove the new video card if it is still in the PC. Turn off the power supply, unplug the AC power, and open up the PC. Then find the CMOS/BIOS clear jumper on the board, and move it from pins 1 and 2, to pins 2 and 3. Leave it in that position for a few minutes. After that, move the jumper back to pins 1 and 2. Check your board's manual for details.

If you use any BIOS settings besides the defaults, be sure to go into the BIOS and reset them again before the PC starts Windows.