Hi everybody! I'm new to this forum, and new to Asrock as well. Most of my previous motherboards have been Asus. Anyway, so I just completed my latest build: Intel 4770K, Asrock Z87 OC Formula, 8gb Corsair Dominator Platinum @ 2133mhz, 2 128gb Corsair Force GS' in RAID 0, LG Blu Ray multi optical drive, Zotac GTX 670 and OCZ ZX 1000w PSU. I have already set up the Intel RAID volume and, designated my optical as the boot drive in the UEFI. Here's the problem, The Bios (or UEFI) will not boot ANY drive. I have no problem entering the UEFI, but once the settings are saved, and the PC rebooted, it simply goes to the Asrock splash screen with the selection in the lower left hand corner and stays there: "Press F2 or Del to run UEFI, Press F6 for instant flash, Press F11 for boot menu, Press Tab to switch screen"
If I go the F11 boot menu route, and manually select the boot drive, it simply goes to a black screen and does nothing. Please note, that it does not matter WHAT DRIVE I set as boot. I get the same black screen using the F11 boot menu. So, I am stuck. I have read all of the documentation (which is vastly insufficient I might add) but nothing will give me any insight. Thus, ANY help is appreciated... HELP!!!!!!!
Thank you in advance
If I go the F11 boot menu route, and manually select the boot drive, it simply goes to a black screen and does nothing. Please note, that it does not matter WHAT DRIVE I set as boot. I get the same black screen using the F11 boot menu. So, I am stuck. I have read all of the documentation (which is vastly insufficient I might add) but nothing will give me any insight. Thus, ANY help is appreciated... HELP!!!!!!!
Thank you in advance
Comment