Error Code 93

[Histerial]

Upon certain restarts and shutdowns and up times i would sometimes get a "93" on the Mr Debugger which just displays a black screen, this usually leads me to pressing the reset button until the screen comes up with "Gen 1, no devices found" and then loads the OS.

Is there any way to tell what is happening?

[parsec]

Re: Error Code 93

Error code 93 is: PCI Bus Hot Plug Controller Initialization

We can't help you further until we know what your PC's components are, mother board, CPU, disk drives, and in this case what devices you have connected to PCI slots.

[Histerial]

Re: Error Code 93

Error code 93 is: PCI Bus Hot Plug Controller Initialization

We can't help you further until we know what your PC's components are, mother board, CPU, disk drives, and in this case what devices you have connected to PCI slots.

Ah sorry forgot to add that.

Mobo: ASRock Extreme4 Z77
CPU : Intel i5 3570k
DVD/RW :
TSSTcorp CDDVDW SH-224DB ATA DeviceTSSTcorp DVD-ROM SH-118AB SCSI CdRom Device

the only thing i have connected in the PCIE slot is the GPU which is
MSI GTX 660ti

[parsec]

Re: Error Code 93

Are you using Windows 7 or 8? Do you have a video cable (DVI, HDMI, etc) connected to the board's I/O panel and your monitor, for the on-CPU graphics, and your video card too?

[Histerial]

Re: Error Code 93

Sorry for the late reply, busy with uni stuff.

Im using Windows 7 but nothing is plugged into the I/O ports at the back as im using the GPU for both monitors.