I've got it set to AHCI in the BIOS, although there's a "Combined IDE/SATA" setting which is set to enable and I have no idea what that does.
In Device Manager, it shows my HDD, connected to the right-most SATA2 connector, as connected to "Standard Dual Channel PCI IDE Controller".
I've checked that msahci is set to start and I've installed the latest Asmedia Sata 1390 driver, which has added an "Asmedia 106x SATA Controller" in Device Manager (with nothing connected) and there's also a "Standard AHCI 1.0 Serial ATA Controller" listed there.
I realise I should probably connect the HDD to one of the two SATA3 connectors and I'll do that but first I want to get the SATA2 ports working as AHCI and not IDE.
In Device Manager, it shows my HDD, connected to the right-most SATA2 connector, as connected to "Standard Dual Channel PCI IDE Controller".
I've checked that msahci is set to start and I've installed the latest Asmedia Sata 1390 driver, which has added an "Asmedia 106x SATA Controller" in Device Manager (with nothing connected) and there's also a "Standard AHCI 1.0 Serial ATA Controller" listed there.
I realise I should probably connect the HDD to one of the two SATA3 connectors and I'll do that but first I want to get the SATA2 ports working as AHCI and not IDE.
Comment