1394 GUID is invalid at bios and flash

[abigtruk]

Got a new bios chip for my X79 Extreme4 and now i get "1394 GUID is invalid at bios and flash" on boot and have to press f1 to continue,any ideas ?

Some actual support from asrock would be nice........

[abigtruk]

Re: 1394 GUID is invalid at bios and flash

Pablo at asrock USA sent me a nice little program to fix my issue thanks cobber

(involved starting in DOS and entering the motherboards 1394 ID,easy )

[Adjo]

Re: 1394 GUID is invalid at bios and flash

Pablo at asrock USA sent me a nice little program to fix my issue thanks cobber

(involved starting in DOS and entering the motherboards 1394 ID,easy )

I'm in exactly the same boat. New BIOS chip and getting this error. My only problem is....the instructions I've been given by ASROCK involve getting the 1394 GUID of the floppy connector on the motherboard.....and the x79 extreme4 doesn't even have a floppy connector. Any help would be much appreciated........

[ASRock TSD - Emily]

Re: 1394 GUID is invalid at bios and flash

Dear adjo,

I have sent the tool to you for re-writing 1394ID.

Please kindly try it.

If any question, please kindly let me know.

Thank you!

Have a nice day
ASRock TSD
Emily

[Adjo]

Re: 1394 GUID is invalid at bios and flash

Hi Emily....

The fix would work fine - only the extreme4 doesn't have a floppy connector on the board. Is the 1394 GUID located somewhere else on this board?

Adam

[RobertB]

Re: 1394 GUID is invalid at bios and flash

Dear adjo,

I have sent the tool to you for re-writing 1394ID.

Please kindly try it.

If any question, please kindly let me know.

Thank you!

Have a nice day
ASRock TSD
Emily

It's nice to see that some people do get support here. Is there any chance that somebody is looking at my problem? New build gives six beeps, won't POST

[smyrlbau]

Re: 1394 GUID is invalid at bios and flash

Sounds like you need a hug

[RobertB]

Re: 1394 GUID is invalid at bios and flash

Sounds like you need a hug

Are you offering one smyrlbau? LOL. If you are thanks. Emily has contacted me and offered some steps to try. Most of them I had already tried except for trying a different CPU (because I don't have a suitable one just sitting around). And Asrock Support has contacted me by email finally and offered the same advice. Their closing remark was: If the problem still cannot be solved, please kindly contact your local dealer to check your system. That will be hard to do when I am used to making a living fixing other people's computers. I would describe myself as experienced when it comes to building and maintaining computer systems. Given that I am unable to get any information on what the system is saying when it beeps 6 times at "4F",and then shows "0d". I guess that I'm just going to have to ask the dealer for an RMA on the board and hope that it isn't a problem with the CPU.</SPAN></SPAN>