Tweet
I just put together a system using the Extreme 4 board with an Intel i7 2600K and 2X4GB G.Skill memory. It's running Win 7 Ultimate 64. I have the screen saver set for 6 minutes and after 20 minutes the monitor is put in standby. The system does not go into standby. As soon as the monitor is off, the system starts making sounds like I'm plugging in a USB device and unplugging it, about every three or four minutes. I've tried changing some of the USB settings for legacy but no luck in stopping the noises. The monitor is plugged into the DVI port on the motherboard, and I don't have a separate video card installed yet. Any thoughts or suggestions?
-
-
Re: Z68 Extreme 4, strange sounds when monitor in standby
It sounds like you are losing your video drivers. Check the video card.Intel 3960X
Intel 2600K CPU
Asus X79 Sabertooth Mobo
Asus Z77 Fatal1ty One Professional
Asus 980GTX Matrix
AMD 290X Matrix
CORSAIR DOMINATOR 32gbs 1866mhz with Corsair Link
CORSAIR DOMINATOR 16gbs 1866mhz with Corsair Link
Samsung 1TB 850 Pro and 1.5 TB WD Black Data Drive
512 Samsung 850 Pro SSD and 256 Sandisk Extreme Pro 960gb SSD Data drive
Corsair 1200W AX Modular Corsair AX850W Modular PSU
Corsair Obsidian 800D Case Corsair Obsidian 650D Case
Swiftech H20-330 Edge Kit Cooling Corsair H-60 Enclosed Water Kit
Corsair H-100 Enclosed Loop in PC2
Windows 7 64 bit Windows 7 64 bit Professional -
Re: Z68 Extreme 4, strange sounds when monitor in standby
I've updated all of the drivers from the ASRock to the latest version. It's making the Windows device connect/ device disconnect sounds. I've had this same monitor on other systems and never had this problem. I'll keep looking.Comment
Comment