1. 1.20 did not recognise vram as 1.5vbut applied 1.59v
2.1.20 was not stable at 48 multiplier with 102 mhz bclk,1.30 is
3.bios v 1.30(for me cures the freezing mouse/freezing eufi problem.
4.Bios v 1.30 loads CIE disabled as a default ,so with 4.8ghz profile selected the cpu will have 1.48 v continuously.Enabling CIE in bios allows the voltage to vary normally between 1.0v and 1.48v max.
5. bios version 1.30 has better stability overall and allows a higher clock on my i5 2500k.
Best 24/7 atm with no testing failures is
103 mhz baseclock
48 multiplier
ie cpu at 4.94 mhz. max cpu v applied 1.49v under turbo.
memory 1333mhz 8-8-8-24 at 1.545v.
bios 1.20(originally supplied on mbrd) allowed a maximum multiplier of 46.
Temps at full load under either bios read approx 65C cpu and 70-80C for each core,varying up and down(no core throttled,although throttling is enabled for safety).
2.1.20 was not stable at 48 multiplier with 102 mhz bclk,1.30 is
3.bios v 1.30(for me cures the freezing mouse/freezing eufi problem.
4.Bios v 1.30 loads CIE disabled as a default ,so with 4.8ghz profile selected the cpu will have 1.48 v continuously.Enabling CIE in bios allows the voltage to vary normally between 1.0v and 1.48v max.
5. bios version 1.30 has better stability overall and allows a higher clock on my i5 2500k.
Best 24/7 atm with no testing failures is
103 mhz baseclock
48 multiplier
ie cpu at 4.94 mhz. max cpu v applied 1.49v under turbo.
memory 1333mhz 8-8-8-24 at 1.545v.
bios 1.20(originally supplied on mbrd) allowed a maximum multiplier of 46.
Temps at full load under either bios read approx 65C cpu and 70-80C for each core,varying up and down(no core throttled,although throttling is enabled for safety).
Comment