Hi,
I am newbie here. I have something to ask about proper setting with this motherboard.
My rig:
Motherboard Asrock 890gx Extreme 3
Processor: Phenom II XII 555 BE unlockable to Phenom II X4 B50 (4 cores)
RAM: Gskill F3 CL7 GBECO 2x2GB
PSU: Enermax 565 VP
Harddisk 1: Hitachi 250GB SATA 3.5"
Harddisk 2: Hitachi 120 GB SATA 2.5"
Harddisk 3: WD1200JB 3.5" IDE (using IDE/SATA to USB adapter)
DVD ROM: Pioneer A120S IDE (using thermaltake silver river 5.25" USB)
DVD RW: LG 4163B IDE (could not communicate properly using IDE/SATA to USB adapter)
CDRW: Teac 5224 IDE (could not communicate properly using IDE/SATA to USB adapter)
Windows 7 Ultimate Edition
Those in bold are one problem. When I press eject button on the drives or through windows, the lamp indicator just blinking, but the tray would not open.
Another problem: ATA devices (2 SATA disks) are recognized as primary and secondary IDE ATA in Windows devices. I select storage option as IDE on BIOS due to using AHCI causing looping restart.
Are there any suggestions/hints what to do?
Thanks
I am newbie here. I have something to ask about proper setting with this motherboard.
My rig:
Motherboard Asrock 890gx Extreme 3
Processor: Phenom II XII 555 BE unlockable to Phenom II X4 B50 (4 cores)
RAM: Gskill F3 CL7 GBECO 2x2GB
PSU: Enermax 565 VP
Harddisk 1: Hitachi 250GB SATA 3.5"
Harddisk 2: Hitachi 120 GB SATA 2.5"
Harddisk 3: WD1200JB 3.5" IDE (using IDE/SATA to USB adapter)
DVD ROM: Pioneer A120S IDE (using thermaltake silver river 5.25" USB)
DVD RW: LG 4163B IDE (could not communicate properly using IDE/SATA to USB adapter)
CDRW: Teac 5224 IDE (could not communicate properly using IDE/SATA to USB adapter)
Windows 7 Ultimate Edition
Those in bold are one problem. When I press eject button on the drives or through windows, the lamp indicator just blinking, but the tray would not open.
Another problem: ATA devices (2 SATA disks) are recognized as primary and secondary IDE ATA in Windows devices. I select storage option as IDE on BIOS due to using AHCI causing looping restart.
Are there any suggestions/hints what to do?
Thanks
Comment