I'm trying to setup a high speed SCSI RAID0 for WINXP. I've tried an IBM ServeRaid 4L with Raid0 using 2 x Seagate 36G 15K drives. The performance was not a lot higher than a single drive.
So I tried a Mylex 352 AcceleRaid card. Again, the Raid0 performance was only a little higher than a single drive.
I'm testing with Sisoft, PCmark, ATTO and HDTach.
I've also tried software Raid0 under XP with my current LSI 20140 controller, again no real gains.
Am I missing something ? IDE RAID0 with the onboard HTP370 is smokin' fast compared to a single drive.
Someone said there is a lot of overhead with SCSI RAID, and thats the problem.
So I tried a Mylex 352 AcceleRaid card. Again, the Raid0 performance was only a little higher than a single drive.
I'm testing with Sisoft, PCmark, ATTO and HDTach.
I've also tried software Raid0 under XP with my current LSI 20140 controller, again no real gains.
Am I missing something ? IDE RAID0 with the onboard HTP370 is smokin' fast compared to a single drive.
Someone said there is a lot of overhead with SCSI RAID, and thats the problem.
Comment