If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Just wondering because I just got a new one to support Athlon XPs. Will I need to upgrade again to goto a Hammer CPU or could it work with a BIOS flash? :?:
although the clawhammer will be based on new 64 bit technology it says that it will be backwards compatible to work with existing x86 archtectures.. Given that I would think that a simple BIOs flash would be all that is needed.
although the clawhammer will be based on new 64 bit technology it says that it will be backwards compatible to work with existing x86 archtectures.. Given that I would think that a simple BIOs flash would be all that is needed.
but if more than 462 pins are required in the proc. to support the 64 bit instructions - i'll be a tight fit in an s462 mainboard :hammer:
This isn't just a die shrink - it's a new architecture - AMD's website says a new socket is forthcoming
although the clawhammer will be based on new 64 bit technology it says that it will be backwards compatible to work with existing x86 archtectures.. Given that I would think that a simple BIOs flash would be all that is needed.
What they're talking about is the fact that the new processor will still be compatible with existing hardware components and programs/operating systems. A simple BIOS FLASH won't do the trick because a new socket design will be necessary.
Old age and treachery will overcome youth and skill My Toys
Methinks that the Hammer will require a serious redesign in board technology - it's not just an evolutionary step (eg Thunderbird to Palomino), but a very revolutionary one :)
Methinks that the Hammer will require a serious redesign in board technology - it's not just an evolutionary step (eg Thunderbird to Palomino), but a very revolutionary one :)
A 64 bit processor, has major differences compared to a 32 bit one....For instance, 64 bit wide data bus....Therefore, unless you want to have multiplexed signals (which is not very good), you want 32 more pins for the data bus.....(without taking into account other things you may need). That alone, makes the slot less likely to be kept the same....
The second thing, is the chipset, which will also have to be designed to support the CPU....Current chipsets are designed for 32-bit processors....
The compatibility with current architectures, simply means hammer will use PC hardware and will be able to run programs designed for the 8/16/32 bit x86 processors .
I would have to agree with Orestis. A new mobo will be required for a hammer proc. It may even need newer RAM because in nine monthes when it does come out, the DDR standard will have already moved to DDR333 and DDR400. If not QDR.
It would be very cool thou if you could use a Socket 462 to run a Hammer in only 32-bit mode. As to be upgrade friendly. It wouldn't support anything 64-bit and of course would get a major performace hit. Just changeup the mobo and you've almost double proc performance. That would be a very market savvy thing for AMD to do. But we know that is near impossible and most unlikely.
What im wondering is if they are going to change socket format for the hammer are they going to do the same for the XP/Duron lines too? Or are they going to actually have two different socket formats in between the processors? Sounds like an Intel move...
Comment