I nabbed myself an Abit AI7 and 3.0C L336B264 (it's a B! ) cpu. Had to stick it in my Accent HT200S desktop case as it's the only one i have. Was planning to get some power + reset switch connector wires to set it up on a bench.
All Pics: http://www.fileshosts.com/pentium4/D1/abit/AI7/web/
Lovely NB heatsink (feels a bit loose though)
New 3.0C heatsink with small copper round center
The plastic bracket's white pegs were bloody hard to get out. But finally got them out to install MCX4000 with 80 to 120mm aluminium adaptor
With 120x38mm Delta 190cfm fan installed:
Everything installed in the HT200S case
Board LED
System
Installed
2.4C Q322A285 - to test limits of board first
3.0C L336B264
Memory to test for now:
2x 512MB XMS3200C2
2x 512MB XMS3500C2
2x 512MB OCZ PC3500 Gold DC
2x 512MB OCZ PC3500 Platinum Limited Edition DC
2x 512MB OCZ PC3700 Gold DC
2 - 4 x 256MB OCZ RulesOCZ RulesOCZ RulesOCZ RulesOCZ Rules PC4000
2 - 4 x 512MB Hynix PC3200 D43
128MB Gigacube 9600PRO
(unfortunately 9800PRO doesn't fit the case when hdd is installed see 9600PRO just fits here
120GB WD 1200JB
Yamaha CD-RW burner
520W Topower Gold dual fan PSU
====
@ stock the bios reports
2.4C @ 2400mhz
CPU: 35C
System: 27C
PWM: 27 - 28C
Unfortunately, i don't like how Abit divided the bios monitoring pages into one page for temps, one for voltages and one for fans
Prefer to see all of it on one page in the bios!
Abit's EQ or uGuru
=======================
Some default benchmarks to start with
2X 512MB OCZ PC3500 Platinum Limited Edition Dual channel sticks
1:1
@ 200mhz 2-2-2-5 at 2.8v
(can do it at 2.7v but since memory is rated at 2.75v and no 2.75v vdimm option in bios so used 2.8v)
GA = F1
Refresh Cycle Time = AUTO
Read Delay = AUTO
Read Delay Adjust = AUTO
Command Per Clock = AUTO
Sandra 2004 STD
Buffered: 4987/4985
Unbuffered: 3162/3254
Aida32 3.85
Read: 5137
Write: 2101
Pcmark2002
CPU: 6008
MEM: 9868
HDD: 1082
Pcmark04 = 3978
3Dmark2001: 11,986
3Dmark2003: 3441
CPUZ for AI7 when GAT is set seems to think 1:1 is 5:4 for some reason, but as you can see 1:1 benchmark results are above..
========================================
========================================
And i can confirm AI7 does have 3.2v vdimm options
All Pics: http://www.fileshosts.com/pentium4/D1/abit/AI7/web/
Lovely NB heatsink (feels a bit loose though)
New 3.0C heatsink with small copper round center
The plastic bracket's white pegs were bloody hard to get out. But finally got them out to install MCX4000 with 80 to 120mm aluminium adaptor
With 120x38mm Delta 190cfm fan installed:
Everything installed in the HT200S case
Board LED
System
Installed
2.4C Q322A285 - to test limits of board first
3.0C L336B264
Memory to test for now:
2x 512MB XMS3200C2
2x 512MB XMS3500C2
2x 512MB OCZ PC3500 Gold DC
2x 512MB OCZ PC3500 Platinum Limited Edition DC
2x 512MB OCZ PC3700 Gold DC
2 - 4 x 256MB OCZ RulesOCZ RulesOCZ RulesOCZ RulesOCZ Rules PC4000
2 - 4 x 512MB Hynix PC3200 D43
128MB Gigacube 9600PRO
(unfortunately 9800PRO doesn't fit the case when hdd is installed see 9600PRO just fits here
120GB WD 1200JB
Yamaha CD-RW burner
520W Topower Gold dual fan PSU
====
@ stock the bios reports
2.4C @ 2400mhz
CPU: 35C
System: 27C
PWM: 27 - 28C
Unfortunately, i don't like how Abit divided the bios monitoring pages into one page for temps, one for voltages and one for fans
Prefer to see all of it on one page in the bios!
Abit's EQ or uGuru
=======================
Some default benchmarks to start with
2X 512MB OCZ PC3500 Platinum Limited Edition Dual channel sticks
1:1
@ 200mhz 2-2-2-5 at 2.8v
(can do it at 2.7v but since memory is rated at 2.75v and no 2.75v vdimm option in bios so used 2.8v)
GA = F1
Refresh Cycle Time = AUTO
Read Delay = AUTO
Read Delay Adjust = AUTO
Command Per Clock = AUTO
Sandra 2004 STD
Buffered: 4987/4985
Unbuffered: 3162/3254
Aida32 3.85
Read: 5137
Write: 2101
Pcmark2002
CPU: 6008
MEM: 9868
HDD: 1082
Pcmark04 = 3978
3Dmark2001: 11,986
3Dmark2003: 3441
CPUZ for AI7 when GAT is set seems to think 1:1 is 5:4 for some reason, but as you can see 1:1 benchmark results are above..
========================================
========================================
And i can confirm AI7 does have 3.2v vdimm options
Comment