Hello.
I have a Tenda TE-N3 N150 WiFi Router Tenda TE-N3 N150 Easy Setup Router (White) - Buy Tenda TE-N3 N150 Easy Setup Router (White) Online at Low Price in India - Amazon.in
which is pretty good and has 1 WAN input and 1 LAN output. I have configured my Router and now it applies my ISP username and password over a PPPoE connection type and logs me in when I switch the router ON.
Now this router can be used as a repeater, BUT in a wireless mode. Can I set it up so that I can use an ethernet (LAN) cable (like the one that connects this router to my PC) and then use it as a repeater? Since it's range is pretty less (less than 10 meters). I plan to use a 20m ethernet cable to connect it so that I can have connection in my garage?! Kindly do NOT advise to buy another Router which can cover till my garage. Since if it can work, then I plan to buy one Tenda N4 (which has 4 LAN outputs) and from these I can have 3 Tenda N3 and cover a vast area each connected with 20-30m cables, which a single Router can't.
My current setup:
ISP ethernet cable goes to WiFi Router WAN > another ethernet cable goes to my PC LAN.
[img]http://funkyimg.com/i/2463t.png[/img]
My idea is (will it work?)
ISP cable goes to WiFi WAN > Ethernet cable (one which connects it to my PC) goes to ANOTHER Router (same model) > From this 2nd Router, ethernet cable goes to my PC LAN.
[img]http://funkyimg.com/i/2463x.png[/img]
BOTH the WiFi should work and of the second Router, even the LAN should work.
I sincerely appreciate your suggestions. Thank you very much.
I have a Tenda TE-N3 N150 WiFi Router Tenda TE-N3 N150 Easy Setup Router (White) - Buy Tenda TE-N3 N150 Easy Setup Router (White) Online at Low Price in India - Amazon.in
which is pretty good and has 1 WAN input and 1 LAN output. I have configured my Router and now it applies my ISP username and password over a PPPoE connection type and logs me in when I switch the router ON.
Now this router can be used as a repeater, BUT in a wireless mode. Can I set it up so that I can use an ethernet (LAN) cable (like the one that connects this router to my PC) and then use it as a repeater? Since it's range is pretty less (less than 10 meters). I plan to use a 20m ethernet cable to connect it so that I can have connection in my garage?! Kindly do NOT advise to buy another Router which can cover till my garage. Since if it can work, then I plan to buy one Tenda N4 (which has 4 LAN outputs) and from these I can have 3 Tenda N3 and cover a vast area each connected with 20-30m cables, which a single Router can't.
My current setup:
ISP ethernet cable goes to WiFi Router WAN > another ethernet cable goes to my PC LAN.
[img]http://funkyimg.com/i/2463t.png[/img]
My idea is (will it work?)
ISP cable goes to WiFi WAN > Ethernet cable (one which connects it to my PC) goes to ANOTHER Router (same model) > From this 2nd Router, ethernet cable goes to my PC LAN.
[img]http://funkyimg.com/i/2463x.png[/img]
BOTH the WiFi should work and of the second Router, even the LAN should work.
I sincerely appreciate your suggestions. Thank you very much.
Comment