I have a Phoenix Award Bios on this system and its loaded full of options, most I understand (Mostly) but some I have alot of doubts about and the manual is nearly useless.
If anyone can help me out on the right settings for my CMOS, please post ..
---------------------------------------------------------------------------
System Specs;
P4 2.4 ghz CPU (533)
ATI Radeon 9800 pro
512 2700 RAM 333 speed
Biostar USeries U8598 Mainboard (VIA Chipset)
160 GB Maxtor (8mb Buffer) Harddrive
O.S. Win XP Pro
------------------------------------------------------------------------------
Dram Control Rate (1T command or 2T Command)
DRam Bust Len (4 or 8)
Write Recovery Time (3T or 2T)
AGP Aperture Size (AGP Mode, 128M, or 256M)
AGP Master 1 WS Write and Read (enable or Disable)
------Writes\Reads to AGP are executed with 1 wait states.
DBI Output for AGP trans (Enable or Disable)
VLink 8X Support (Enable or Disable)
System Bios Cacheable (Enable or Disable)
Video Ram Cacheable (Enable or Disable)
Delay Prior to Thermal (4min, 8min, 16min, 32min)
IDE DMA Transfer Access (Enable or Disable)
Onchip IDE Channel 0\1 (Enable or Disable)
UR2 Duplex Mode (Full or Half)
Midi Port Address (300, 330, 290, disable)
midi port IRQ (5 or 10)
Question, what are midi ports?
CPU clock ratio
Spread Spectrum (enable or Disable)
CPU Clock (133 up to 165) set at 133
CPU Voltage (set at 1.45 v)
DDR voltage (set at 2.60 v)
AGP Voltage (set at 1.50 v)
DDRVTT Voltage (set at 1.25 v)
If anyone can help me out on the right settings for my CMOS, please post ..
---------------------------------------------------------------------------
System Specs;
P4 2.4 ghz CPU (533)
ATI Radeon 9800 pro
512 2700 RAM 333 speed
Biostar USeries U8598 Mainboard (VIA Chipset)
160 GB Maxtor (8mb Buffer) Harddrive
O.S. Win XP Pro
------------------------------------------------------------------------------
Dram Control Rate (1T command or 2T Command)
DRam Bust Len (4 or 8)
Write Recovery Time (3T or 2T)
AGP Aperture Size (AGP Mode, 128M, or 256M)
AGP Master 1 WS Write and Read (enable or Disable)
------Writes\Reads to AGP are executed with 1 wait states.
DBI Output for AGP trans (Enable or Disable)
VLink 8X Support (Enable or Disable)
System Bios Cacheable (Enable or Disable)
Video Ram Cacheable (Enable or Disable)
Delay Prior to Thermal (4min, 8min, 16min, 32min)
IDE DMA Transfer Access (Enable or Disable)
Onchip IDE Channel 0\1 (Enable or Disable)
UR2 Duplex Mode (Full or Half)
Midi Port Address (300, 330, 290, disable)
midi port IRQ (5 or 10)
Question, what are midi ports?
CPU clock ratio
Spread Spectrum (enable or Disable)
CPU Clock (133 up to 165) set at 133
CPU Voltage (set at 1.45 v)
DDR voltage (set at 2.60 v)
AGP Voltage (set at 1.50 v)
DDRVTT Voltage (set at 1.25 v)
Comment