No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
Samail
Junior Member
Last Activity: 01-15-2016, 11:10 AM
Joined: 10-04-2013
Location: Bulgaria
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Samail
    replied to Asrock X58 extreme - not powering up
    Re: Asrock X58 extreme - not powering up

    Thanks for the advise Joe :) Today tried new 3V cmos battery, with the same result :(
    My specs are :

    Mobo: Asrock x58 Extreme
    CPU : Intel i7-950 LGA 1366 ( not OCed, at stock voltages and frequencies)
    RAM: 3x4GB Kingston...
    See more | Go to post
    Last edited by Samail; 01-12-2016, 11:40 AM.

    Leave a comment:


  • Samail
    started a topic Asrock X58 extreme - not powering up

    Asrock X58 extreme - not powering up

    Hello folks!

    Recently my rig with Asrock X58 Extreme stopped powering on. The first thing I suggest was the PSU or the case power switch - so I took 100% working PSU from the other PC I have ( Cooler Master Silent Pro M600), disconnected all the peripherals hardware from the Mobo ( HDD,...
    See more | Go to post

  • GF9600GT @ SLI with latest drivers PCI-E Gen.2 question

    Hello folks :)!


    Recently I decided to resurect one of mine old rigs :) Here is the specs :


    Mobo: MSI P7N SLI Platinum
    CPU : Intel Core 2 Duo E7400
    RAM : 6GB DDR2 800
    VGA : 2x GF9600GT Gigabyte 1GB @ SLI
    PSU : 500W Cooler Master
    OS...
    See more | Go to post

  • Re: Major issue with enabling PCIE Link speed GEN3

    Updated info!

    Hello


    I found the source of the problem after i set my VGA on another PCIE 3.0 ready Mobo with PCIE 3.0 ready CPU. The card didn't start at 3.0 again. The VGA BIOS is 015.025.000.099.000000....
    See more | Go to post

    Leave a comment:


  • Re: Major issue with enabling PCIE Link speed GEN3

    Thank you for the information. I did step 1) from your suggestions many times through my tests. On Saturday will test my VGA on another PCIE 3.0 ready Mobo and another PCIE 3.0 ready VGA on my Mobo. Will post the updated info then. If...
    See more | Go to post
    Last edited by Samail; 10-09-2013, 08:42 AM.

    Leave a comment:


  • Re: Major issue with enabling PCIE Link speed GEN3

    Thank you for the response. Will await your further instructions and support.
    See more | Go to post

    Leave a comment:


  • Re: Major issue with enabling PCIE Link speed GEN3

    Thank you for the quick assistance - will wait response from ASRock TSD ​- I hope they will find solution of my problem.
    See more | Go to post
    Last edited by Samail; 10-08-2013, 01:41 AM.

    Leave a comment:


  • Re: Major issue with enabling PCIE Link speed GEN3

    I hope so too :) Thank you very much for the kind advices and assistance. Will wait until Asrock release new BIOS and will try with it - hope that will fix my issue. That was my first Asrock product i buy - hope it will not be the last....
    See more | Go to post

    Leave a comment:


  • Re: Major issue with enabling PCIE Link speed GEN3

    I don't have the option "Auto" in my PCIE Link speed options for the separate PCIE slots - the options are Gen1, Gen2 and Gen3. The default option is Gen2. When i reflashed my BIOS with 3.20 again I was keep in mind, that i...
    See more | Go to post
    Last edited by Samail; 10-05-2013, 02:42 PM.

    Leave a comment:


  • Re: Major issue with enabling PCIE Link speed GEN3

    My BIOS version is 3.20 ( bought the Mobo with it already installed). These INF\chipset installation program and Intel IME software must be run through Windows right ? Will they affect somehow the BIOS to allow it to enable PCIE 3.0 without...
    See more | Go to post
    Last edited by Samail; 10-05-2013, 07:28 AM.

    Leave a comment:

No activity results to display
Show More
Working...
X