Re: ram voltage 1.35 Vs 1.5
The ones i have are these:
G.Skill F3-10666CL7D-4GBECO
I think they support xmp 1.5v but that would be overclock.
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
themaster1
Junior Member
Last Activity: 02-04-2017, 06:46 PM
Joined: 03-13-2013
Location: usa
-
ram voltage 1.35 Vs 1.5
I'm planning to buy another set of ram soon (gskill ripjaws) and i'm wondering if this new set will run ok because the voltage is 1.5 v (standard) whereas the current set run at 1.35v (Eco).
Thanks for your inputs guys
-
AXTU + Power savings issues
I have a major issue since a few days.
First my cpu went crazy hot (in a cold day) kinda strange but i've found out there was thermal paste missing: that is fixed now (good formula 6 t.paste re applied).
Now, my cpu goes from 39°C to 60°C without reason (no heavy task), i've noticed...Last edited by themaster1; 08-09-2015, 10:21 AM.
-
Re: 970 pro3+ crazy temps
Today i bought new thermal paste (Antec Formula 6) that's much better
idle temps: 29-30°C
burning (x264 encoding @ 3.2ghz): 45°C max
In a closed case (Lian-Li PC B-10)
Leave a comment:
-
Re: 970 pro3+ crazy temps
I've got two fans for the corsair's heat exchanger moving air in->out and another for the hdd's on the lower front side moving air in->out.2 gpu fans and 1 for the power supply.The pc case is a Lian Li PC B10
At this point i think the culprit...Last edited by themaster1; 03-28-2015, 07:16 AM.
Leave a comment:
-
Re: 970 pro3+ crazy temps
Anyone ?
as of now i have put a limit of 70 % for "max cpu state" in the power savings (win7) so the cpu run between 800 mhz and ~2100 mhz (instead of 3200). Not ideal .
amd cool 'n quiet is enabled
idle temps, ~40°C:
corsair's...Last edited by themaster1; 03-28-2015, 05:45 AM.
Leave a comment:
-
Re: 970 pro3+ crazy temps
when gaming (pcsx2, GOW2...old ps2 games):
cpu load: 40-49% (so not that much of a load)
temp: 74°C
gpu temp: max~45°C (pale in comparison)
ain't that crazy ?
I've tried to fine tune with axtu but i can't seem to find the...Last edited by themaster1; 03-26-2015, 06:29 PM.
Leave a comment:
-
970 pro3+ crazy temps
I got a new bios installed (v2.00) and now i get crazy temps in the bios and on win7 i can't remember which options to enable or tweak to make it cool and quiet.I used to have the cpu under control at about ~40°C idle and ~60°C full load.Now on win7 when i encode a x264 video it goes as high as 100°C...
-
Re: 970 Pro3: Major Bios Problem
Ok so i've tried that Parsec but nothing happen really.
Are you familiar with this procedure:
source here, i quote:
I finally got it working. What I did was
1. Unplug the PC from the wall
2. Hold down the power button for...
Leave a comment:
-
Re: 970 Pro3: Major Bios Problem
Should i boot with the jumper on pins 2-3 ?? the manual says no (pc off only) but i've read other things on the web (for intel boards) now i'm confused.
Anyways, i desperately need answers-solutions
Leave a comment:
No activity results to display
Show More
Leave a comment: