No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
gile
Junior Member
Last Activity: 02-13-2012, 03:26 PM
Joined: 01-24-2011
Location: croatia
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • gile
    replied to Welcome to GIGABYTE Technical Support!
    Re: Welcome to GIGABYTE Technical Support!

    I was wondering if I could connect ssd ocz vertex 3 to a Pci controller Asmedia asm 1061, and set up OS on it?
    See more | Go to post

    Leave a comment:


  • gile
    replied to What Ram?
    Re: What Ram?

    I have tried every combination with memory multiplier, tried setting the MCH Core to 1.24 and dram voltage to 2.2. Even tried removing one ram but the system only boots with ram at 800 MHz, and when it does it seems a bit slow, some programs are not responding at all. Here...
    See more | Go to post

    Leave a comment:


  • gile
    replied to What Ram?
    Re: What Ram?

    I have bought myself 2x2 gb, kingston hyperx ddr2 1066, removed the old sticks (ocz), but when I set manual on 1066 with dram voltage set to 2.1v. and timings 5-5-5-15, my system won't boot. I have to remind that my cpu is set to 400x9.5, with voltage of 1.3625v. Can someone...
    See more | Go to post
    Last edited by gile; 12-23-2011, 06:09 PM.

    Leave a comment:


  • gile
    replied to What Ram?
    Re: What Ram?

    My cpu host frequency is set to 400, and system multiplier is 9.5. I was wondering if I could gain more performance with 8gb of 1066 Mhz Ram, cause perhaps I could push the host freq. higher? Or should I leave the host freq. at 400, and just put a 8gb of 800Mhz Ram?
    See more | Go to post

    Leave a comment:


  • gile
    started a topic What Ram?

    What Ram?

    I want to upgrade ram on my gigabite ga-ep45-ds3, and was wondering what is the best choice and also what frequency should it be?
    See more | Go to post

  • gile
    replied to Overclocking E8500 on EP45-DS3
    Re: Overclocking E8500 on EP45-DS3

    I decided to set the lower FSB and make it stabile, because I´m worried how my computer boots on higher FSB; when the Windows logo apears the picture twitches-freezes.So I tried with FSB=411,Timings=5-5-5-18, tRd=10,VCORE=1.40000,VTT=1.26,
    PLL=1.59,...
    See more | Go to post

    Leave a comment:


  • gile
    replied to Overclocking E8500 on EP45-DS3
    Re: Overclocking E8500 on EP45-DS3

    I tried the CPU and MCH Clock Skew and the results are:
    CPU Clock Skew 50-failed on 800K.
    CPU Clock Skew 100-failed on 800K.
    MCH Clock Skew 50-1h54m.failed on 32K.
    MCH Clock Skew 100-PC restarted during Prime95 Blend test...
    See more | Go to post

    Leave a comment:


  • gile
    replied to Overclocking E8500 on EP45-DS3
    Re: Overclocking E8500 on EP45-DS3

    I have run a series of tests with Timings 5-5-5-18,tRd=10,CPU PLL=1.59,VCORE=1.40,MCH CORE=1.24,VTT=1.26-1.40,
    both MCH and CORE Reference alterations=-4-+4, FSB=421-423 and nothing seems to be working. I´ve got the best
    result with: VTT=1.28,CPU...
    See more | Go to post

    Leave a comment:


  • gile
    replied to Overclocking E8500 on EP45-DS3
    Re: Overclocking E8500 on EP45-DS3

    With VCORE=1.4000V,CPU PLL=1.59V,MCH CORE=1.24V,DRAM VOLTAGE=2.180V,Timings=5-5-5-18
    and tRd=10 I first run Prime95 custom test FFT=800K,if passed I run Blend test:

    VTT***CPU REF.*MCH REF.
    1.28V*0.810V***0.790V-After 5h.28m.failed...
    See more | Go to post

    Leave a comment:


  • gile
    replied to Overclocking E8500 on EP45-DS3
    Re: Overclocking E8500 on EP45-DS3

    With VTT=1.26, CPU PLL=1.59, MCH Core=1.24, CPU Ref.=0.798,DRAM Voltage=2.180,timings 5-5-5-18, tRd=10 for both channels.
    First I run Prime95 custom test FFT=800K,if passed I run Blend test.
    MCH Reference
    -1[0.778V]-After 7hours 30minutes...
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X