Just want to post these settings that fixed my s3 sleep problem. Maybe they will be helpful to someone else with the issue.
In my case, I would get a reboot loop after sleep if my FSB was set to 400 or above. It seems that sleep started working when I adjusted the MCH Reference voltage,...
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
ispete
Junior Member
Last Activity: 02-27-2010, 12:50 PM
Joined: 02-18-2010
Location: Texas
-
Here's the settings that resolved my s3 sleep reboot loop issue
-
Re: Can someone explain this CPU mark?
It was the beta version causing the problem.
-
Core Temp, Real Temp, passmark Hang at startup...
As soon as Vista loads, if I double click on any one of those programs they take about 2-3min to open up. Nothing happens for about 2min then the windows just pop up. However, any other program (such as Speedfan) works instantly. I searched around and found one other person with this issue but it...
-
Re: Prime 95 Help...FATAL ERROR!!!
What are you system specs/ bios voltages. You may need to change your DRAM voltage. I encountered this and it was due to my DRAM voltage being too low.
Leave a comment:
-
Can someone explain this CPU mark?
I'm running a q6600 overclocked to 3.1GHz. After running Passmark Performance Test CPU mark, I compared my results to some other baselines running the same processor. I was 2nd highest in all of the CPU tests yet my CPU mark is the lowest? Can someone explain how the CPU mark is calculated?
...
-
Re: ep45-ud3p Where is the Fine "CPU Clock Ratio" control?
That clears it up then. Thanks for your help.
Leave a comment:
-
Re: ep45-ud3p Where is the Fine "CPU Clock Ratio" control?
Ah I see. So the option only appears if you're running a 45nm processor?
Leave a comment:
-
Re: ep45-ud3p Where is the Fine "CPU Clock Ratio" control?
Thank you, I was curious on that. I have an Intel q6600
Leave a comment:
-
ep45-ud3p Where is the Fine "CPU Clock Ratio" control?
I have rev 1.0 of the ep45-ud3p board. I've flashed the bios to F9 and still no "Fine CPU Clock Ratio" available in the BIOS? It seems like others have this option. If possible how do I make this available? Thanks.
No activity results to display
Show More
Leave a comment: