Re: Memory Timings Explained W/ Suggested Timings & Memset VS. BIOS
I was wondering if its better to try and reduce your trfc vs tras?
Im using OCZ2P1066LV4GK, e7400, and ud3p, below are my settings stable on memtest and prime95:
9x430
2.66D...
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
osme02
Junior Member
Last Activity: 08-21-2009, 04:52 PM
Joined: 06-22-2009
Location:
-
Re: HELP: EP45-UD3P Dual Channel Problem!!!
i actually bought it off someone on anandtech forums that said it was an open box time. He said he had his tech test it with "3 different brands" of 2gbx2 with no problems. I dont see how that is possible since I have tried two brands...Last edited by osme02; 06-23-2009, 11:44 AM.
Leave a comment:
-
Re: Welcome to GIGABYTE Technical Support!
i started a thread so i dont crowd this one.
http://forums.tweaktown.com/f69/help...91/#post303627
Leave a comment:
-
Re: HELP: EP45-UD3P Dual Channel Problem!!!
i tried your settings above and i have tried overclocking (Vcore at 1.325v) with:
7X400 2.0B
8x333 2.4B
Again single channel mode works fine (slot 1&2)
slots 1&3 reboot loopLast edited by osme02; 06-23-2009, 11:01 AM.
Leave a comment:
-
Re: HELP: EP45-UD3P Dual Channel Problem!!!
Please see first post for computer parts.
[code]MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto or Fast
CPU Clock Ratio ..........................: 10
Fine CPU Clock Ratio.....................:.0.5...Last edited by osme02; 06-23-2009, 10:35 AM.
Leave a comment:
-
Re: Welcome to GIGABYTE Technical Support!
i have tried to increase the ram voltage to 1.8->1.9->2.0->2.1v.
I recently tried someone elses PNY RAM with the same results
I have tried MCH 1.05v->1.1v->1.2v->1.22v->1.24v->1.3V
...Last edited by osme02; 06-23-2009, 10:22 AM.
Leave a comment:
-
HELP: EP45-UD3P Dual Channel Problem!!!
hi, long time watcher, first time poster.
my ga-ep45-ud3p (bios f4->f7->f9 none work, cmos cleared) wont boot my g. skill pc6400 2x2gb (f2-6400cl5d-4gbpq) (passed memtest x24hrs in single channel) ram set in slot 1&3. The computer jsut starts running for ~5 sec and then restarts....Last edited by osme02; 06-23-2009, 11:09 AM.
-
Issue with EP45-UD3P
hi, long time watcher, first time poster.
my ga-ep45-ud3p (bios f4->f7->f9 none work) wont boot my g. skill pc6400 2x2gb (cl5d-4gbpq) ram set in slot 1&3. The computer jsut starts running for ~5 sec and then restarts. It never even posts. if...Last edited by osme02; 06-22-2009, 03:11 PM.
Leave a comment:
No activity results to display
Show More
Leave a comment: