According to Windows 7 Professional 64bit, I have been able to upgrade the driver to 11.22.3.9.
I went to the Marvell site and downloaded the 11.45.3.3 driver and setup files. Setup won't install but it does
not tell me why. The Readme says I need 4 files, one of which is a .dll. That...
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
ChuckR
Junior Member
Last Activity: 06-02-2014, 04:44 PM
Joined: 03-17-2009
Location: Las Vegas, NV
-
Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller Driver Issue
-
Free HTML to PDF Converter
I have 2 files that have an HTML wrapper. For some reason I have been unable to find a program or online service that will do a decent job of conversion. I have tried some of the Online services, but they convert the tags to their own sites instead of the locations in the document. None of the Firefox...
-
P6X58D-E Controller Speed
In response to another question on BIOS and SATA, it was stated not to worry about the settings as the controller speed is 150 or 300.
How do I find the current speed?
How can I increase it?
Is it worth raising it, if possible, to improve my
ASUS P6X58D-E
Windows 7 Professional...Last edited by ChuckR; 03-26-2011, 12:35 PM.
-
Re: P6X58D-E i7 930 OC ?
Does setting the CPU RATIO to 21 achieve the BCLK value?
What about these Voltages?
CPU VOLTAGE CONTROL - MANUAL
CPU VOLTAGE 1.25
CPU PLL 1.84
QPI/DRAM 1.24
PCIE ENABLE
CPU SPREAD ENABLE
HT ...
-
-
Re: P6X58D-E i7 930 OC ?
You say you have that MB clocked to 4.2. Your information and JPEG/CPU-Z data show Gigabyte and 920.
Can you show the settings for your P6X58D-E 930 System?...
Leave a comment:
-
P6X58D-E i7 930 OC ?
I have the following System with the following settings at installation. I am at BIOS 0502.
Silverstone FT02
ASUS P6X58D-E i7 930
Kingston Non-ECC 1600MHz Unbuffered (DDR3, 1.65V, CL9, FBGA, Gold) XMP
Xigmatek DarkKnight
Kingston SSDNOW 128gb
WD Black 500gb
...Last edited by ChuckR; 02-25-2011, 11:32 AM.
-
P6X58D-E & i7 930 OC
I am starting to look into doing some overclocking to get my system up to 4.0ghz stable. I found the following settings and wonder if they are suitable for my system. All suggestions welcome.
I found the following settings. Do they make sense for my system? What other adjustments...Last edited by ChuckR; 02-06-2011, 12:53 PM.
-
P6X58D-E and AHCI
With my configuration I am wondering if I should set the Marvel 9128 to AHCI instead of the Standard IDE default?
The board doesn't support IDE so I don't understand the default anyway.
Silverstone FT02, AusTeK P6X58D-E with Intel 930, Kingston 128gb SSDNow, WDC Black 500gb,
TSSTcorp...
-
The Future P55?
I am planning on an end of year build. P55 is a maybe with Gigabyte boards, but the rumor mill review sites pointed out that there is a problem with Sata-III Marvel chips. Can I/we get some valid information on the following board I would like. Non Gaming,
Gigabyte Quality
Sata-III...
No activity results to display
Show More
Leave a comment: