No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse
Filip
Junior Member
Last Activity: 02-20-2010, 02:44 PM
Joined: 08-27-2008
Location: Bitola, Macedonia
-
Kingston KHX1600C9D3K2/4G on LGA1156
Will that ram work on an LGA 1156? I know max safe voltage on I7/I5 is 1.65 but these are rated at 1.7-1.9V. Will they run on 1600Mhz at 1.65V?
-
Re: Capacitor fell off
The capacitors on the mobo have a plastic bit on the bottom, and the pins coming out of them. Now on one side of the plastic bit, there is a trace of glue and on the PCB aswell, but no trace of soldering whatsoever. Maybe im wrong.
And if i decide...
-
Re: Capacitor fell off
Well there is a plastic bit on the bottom which is rounded off on one side and edgy on the other, there is an outline on the mobo aswell, so i cannot missplace it. As long as it is fixable and not being noticable on the mobo, im fine with it. I just don't know which...
Leave a comment:
-
Capacitor fell off
I had a look at my PC and i noticed a capacitor on the floor of the case
The capacitor is completely intact with the plastic bit on the bottom and the pins are fine. It seems it wasnt even soldered on, there was just some glue on the plastic bit and the pins just...
-
Re: Measure MCH Temprature (MCHTEMP)
Im running this on a Gugabyte X48 DS4. Did you do the path to your mama.sys file?
X*: Windows\System32\drivers\Mama.sys
* X as in weherever your windows instalation is
Here is how it is supposed to...Last edited by Filip; 09-12-2009, 05:45 AM.
Leave a comment:
-
Measure MCH Temprature (MCHTEMP)
I went on the internet and i found this:
??????????? Overclockers.ru • ???????? ???? - MCHTemp - ????????? ??????????? ???????? ?????? ? ??????????? Intel
Surprisingly it measures MCH temp from the built in sensor on the die, not on top of the heatspreader or...Last edited by Filip; 09-11-2009, 07:21 PM.
-
Re: Changing thermalpaste on X48 DS4
I bought it from a large place, official distributor for Gigabyte in the country north of me (Serbia), they also have some shops here. Dam i need to open it again to check
I hope it's not a bad thing if it is an ESLast edited by Filip; 08-23-2009, 02:20 PM.
Leave a comment:
-
Re: Changing thermalpaste on X48 DS4
I don't know if it was confitential need to open it again. I'll probably do that sometime since it is so easy to doLast edited by Filip; 08-23-2009, 02:06 PM.
Leave a comment:
-
Re: Changing thermalpaste on X48 DS4
Well, the pipe going across is actually hotter now, and MB sensor is reporting 33 with +0.175V instead of the 37 at +0.125V. Heatsink is about the same.
I don't know if it is a pre production board, it is rev. 1.3.
Have...
Leave a comment:
-
Re: Changing thermalpaste on X48 DS4
NB had a heatspreader like a CPU, definately, it had a code on it sayng Swhatever, Intel Confidential 07 i think it was
Something like that...Last edited by Filip; 08-23-2009, 11:53 AM.
Leave a comment:
No activity results to display
Show More
Leave a comment: