No announcement yet.

xp 1600 oc guide

  • Filter
  • Time
  • Show
Clear All
new posts

  • xp 1600 oc guide

    could someome pls provide a link to a good guide to oc the xp 1600. Thanx

  • #2
    I'm not sure what you mean by that but here goes.

    For unlocking this interactive guide will show you what bridges need to be closed for unlocking (or combinations of for relocking).

    This here is the best method to carry out the above.

    Now if you're just doin' plain straight overclocking then this guide (though dated now) will have the necessary tips to follow plus checking all the details of your motherboard and BIOS in the motherboard's manual (if ya don't have one then download one from the manufacturer) as this will show you where all the settings necessary can be changed.

    Good Luck :thumb:


    • #3
      Thanx Wiggo,
      What I meant to say the best way to unlock the xp 1600.


      • #4
        HighSpeed PC Athlon XP Unlocking Kit has worked well for me. And keep an eye out for a new Athlon overclocking guide that I should have ready to post within a day or two. :)

        It just went live. :)
        Old age and treachery will overcome youth and skill
        My Toys


        • #5
          Good job there Darth. :thumb:


          • #6
            Great job on that OC'ing guide. I actually read the whole thing. Really good job :thumb: .


            • #7
              To all thank you,
              I have now successfully unlocked my chip. That said it occured with a cost. I burned up my 2000 xp arrggggh. So I got the 1600 for trial and error. Dont ask how I burnt up the 2000 chip. Dumb ass newbie mistake. Anyway, was using the pc unlocking kit but was unable to do it on my 2000 chip after at least 35 attempts no kidding. However I somehow found success with this chip (xp 1600). Not sure if it was me or the chip.

              I would insert a wcpu picture but I dont no how to. I have only set my multiplier at 11 @ 133 fsb. Just happy to get there. Now I will slowly increase to see how far I can go on just air cooling.

              Again thanx to all for your assistance.

              antec 1040 case with 330 true power supply
              xp 1600 unlocked
              epox kha+
              valcano 9
              ati 8500 64mb
              100 gig wd
              120 gig wd
              MS XP home edition
              3 antec fans
              2 hard drive fans
              sb live


              • #8
                As long as you have some good case cooling and then a nice HSF you should be fine :thumb:.


                • #9
                  Hey Darth did you ever get to check out that BIOS for the 8KHA+ that supported the 166MHz AGP/PCI dividers? :?:


                  • #10
                    No... never messed with it. Might be interesting though. :)
                    Old age and treachery will overcome youth and skill
                    My Toys


                    • #11
                      Yeah that should be quite interesting :D.