Announcement

Collapse
No announcement yet.

VGA\Case Cooling help

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    VGA\Case Cooling help

    I am working on keeping my Crossfired MSI R9 290 Gaming cards cool. The top card is the issue. I would like the vga fans not to spin above 80%, since thats when they get louder. I have 5 NZXT 200mm fans and 1 140mm NZXT fan to work with. My liquid cooler is an Corsair H100i and my case is an NZXT H630 with a NZXT Phantom side panel (side 200mm vent). Also I am using a BixFenix Recon fan controller.



    On this photo there is a NZXT 200mm fan on the side panel not shown.
    Attached Files
    Tags: None
  • #2
    Re: VGA\Case Cooling help

    My 2nd attempt is to move the Liquid cooler to the red area and put 2 200mm on the top of the case. I have had better luck with this setup ,but not as cool as I want. I moved the fan controller sensor so that when the gpu's heat up then it will kick the fans up. The 200mm fans are pretty quiet even at full speed.
    Attached Files

    Comment

    • #3
      Re: VGA\Case Cooling help

      In 2011 I did some tests to improve my video card temperatures. The first test involved installing an 87 cfm on the case's side panel blowing directly onto my video card. The high cfm fan test was a major failure as the video card's temperatures were much higher, probably caused by too much turbulence.

      Using a 92mm cooling fan, the video card's PCB temperatures were significantly lower.



      from http://forums.tweaktown.com/video-ca...tml#post395596, post #81






      from http://forums.tweaktown.com/video-ca...tml#post396180, post #83






      from http://forums.tweaktown.com/video-ca...tml#post399562, post #110




      Using a different system and computer case for my SLI setup, the rude and crude cardboard air duct helped to lower the video cards' temperatures. The fan shroud's air intake came from the 64 cfm, 120mm front case fan.



      from http://forums.tweaktown.com/video-ca...tml#post401336, post #112


      Maybe one of these approaches will work for you.
      Q9650 @ 4.10GHz [9x456MHz]
      P35-DS4 [rev: 2.0] ~ Bios: F14
      4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
      MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
      Seasonic SS-660XP2 80 Plus Platinum psu (660w)
      WD Caviar Black WD6401AALS 640GB (data)
      Samsung 840 Pro 256GB SSD (boot)
      SLI @ 16/4 works when running HyperSLI      		 Cooler Master 120XL Seidon push/pull AIO cpu water cooling
      Cooler Master HAF XB computer case (RC-902XB-KKN1)
      Asus VH242H 24" monitor [1920x1080]
      MSI N460GTX Hawk (1GB) video card
      Logitech Z-5500 Digital 5.1 Speakers
      win7 x64 sp1 Home Premium
      HT|Omega Claro plus+ sound card
      CyberPower CP1500PFCLCD UPS
      E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
      Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
      Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
      HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
      win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S      .

      Comment

      • #4
        Re: VGA\Case Cooling help

        USPS Priority Mail. We deliver ........ air?
        #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
        ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.


        #2 - Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

        Comment

        • #5
          Re: VGA\Case Cooling help

          MadHatter, have you looked at an Antec Spot Cool?

          It'll maybe spoil the clean looks as it's deemed ungainly by some.

          Back in the day I had this prob and chose the Spot Cool's over those real ugly slot coolers.
          #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
          ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.


          #2 - Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

          Comment

          Previous template Next
          Working...
          X