Noctua NH-U12P for 1366 Intel i7 920 Temps.

[kenestra1]

[kenestra1]

Re: Noctua NH-U12P for 1366 Intel i7 920 Temps.

Check that last post. The temps seem to be evening out. Hope this is getting better. Also I used the supplied Y-connector to have both fans controlled by the CPU fan input. I could have just used the System fan input for the 2nd fan maybe. Is this the right way to do this? Thanks

[4x64]

Re: Noctua NH-U12P for 1366 Intel i7 920 Temps.

y adapter is fine off the CPU fan output.

The CPU temps will be different on the cores. Usually cores 0 and 1 the temps are close together within one or two c and will be higher than cores 2 and 3 and cores 2 and 3 will be similar if not dead exact. Depending on what TIM you used, and how it was applied and actual contact area will depend on how long it takes to cure. ie- AS5 (arctic Silver 5) takes up to 200 hours to cure but usually within 72 hours, those will be your temps.

[kenestra1]

Re: Noctua NH-U12P for 1366 Intel i7 920 Temps.

Great information. Thanks