Hey... I took out a powersupply fan from a old 200V powersupply... it has 2pin connector.. and its too big to fit anywhere on the motherboard... also the fan is a DV 12V... lol not a good idea? :) Or IS there a way to work it with the motherboard?
Announcement
Collapse
No announcement yet.
Using Powersupply fan with Motherboard!
Collapse
X
-
Yes I've run these into the PSU connectors before. Just connect the red wire from the fan to the yellow wire and the black wire from the fan to the black wire beside the yellow one. Hacking the fan into a cheap "Y" splitter would be the best idea. :smokin:
<center>:cheers:</center>
Comment
-
Yeah if ya get the "Y" splitter as shown (they're very cheap) then cut the yellow wire and the black one beside it at the female connector then just solder the wires together as you stated and cover the joins with insulation. If you do it propperly there should be no probs at all. :smokin:
<center>:cheers:</center>
Comment
Comment