Just wondering where you can buy liquid cooling units for your processor and video card, or has someone got some links to some websites.
No announcement yet.
Liquid Cooling
Collapse
X
-
Re: Liquid Cooling
In my old system, I had a BigWater stuck on a 3000+ newie (2.22ghz) and a 6600GT (596/1050mhz).
With an ambient of 26C, rad fan on 7 volts, the CPU would load at 42C, and the videocard @ 56C.
With the cool n quiet feature on the A64, I could run it passive (rad fan disconnected) whilst just doing stuff in windows, or on the internet.
The bigwater was only really good for it's low temps @ near stock speeds and low noise. Would be crap for SERIOUS overclocking!
Comment
-
Re: Liquid Cooling
With those temperatures, it's worse than a lot, maybe most air cooling. Newcastles aren't the best, but they aren't bad either. Last night my friend and I put together his socket 939 system with an Athlon 64 3000. We used the stock heatsink and the stock thermal compound. I took it to 2.45GHz at 1.55v and it loads around 48c and idles around 44c with ambients around 24c. The video card (6600GT) was at 54c before OCing.Last edited by Yawgm0th; 01-01-2006, 06:47 PM.
Comment
-
Re: Liquid Cooling
As a general rule, those all-in-one wonder kits are only good if you do normal productivity/surfing type activities. Water is pretty safe nowadays, but as long as you understand the basics it isn't too difficult to get something good working. I've been on water for a couple of years now and love it. Fan noise never really bothered me until I got rid of 90% of it, now it doesn't have a place in my systems.
If you decide to get serious about water, make sure to use at least 1/2" OD tubing so the water flow is great enough to be able to effectively remove the heat from your components. Make sure you get a pump that cranks out the pressure so you can take full advantage of the fat tubing. From there you just have to know what order to hook up your water components for maximum efficiency and to let the entire water system run for about 24 hours outside the case to make sure it won't leak. Don't bother spending extra money on these solutions that are supposedly non-conductive. Most are not and the ones that are usually don't have the same cooling abilities as distilled water and an anti-corrosive additive.
If you have questions, just ask and I'll help where I can.Old age and treachery will overcome youth and skill
My Toys
Comment
-
Re: Liquid Cooling
I second www.frozencpu.com . Much more selection than xoxide.
Darthtanion, did you mean 1/2" ID??
I know that wall thickness varies, even within the same brand. I went with 3/8ID 5/8OD tygon, but if you did mean 1/2" ID...would I see a benefit from swapping? <u1:p></u1:p><o:p></o:p>
I've got reservoir->MCP650->DD BI Xtreme III->DD RBX->DD Chipset->reservoir
Eventually I may want to get my 7800GTX watercooled as well and would add it after the CPU block. <o:p></o:p>
I have the radiator and pump in a custom built aluminum frame along with 3 stealth fans and a dedicated mini power supply(out of an external HDD enclosure) which sits under my CPU (I have a corner CPU desk where the CPU is in the middle, under the monitor).
I do overclock to whatever the hardware will take while keeping stability.
Comment
-
Re: Liquid Cooling
Sorry, you're correct in the ID tubing size. My mind wanders sometimes in my old age.
As to your water pattern, it looks good from I can tell but I am not familiar with the Danger Den model numbers you use. As a rule, you want your pump fed directly from your reservior. If you have a radiator as well, it should feed into the reservoir. This means that the water in the reservoir is the coolest in the system and will be fed to your heat-producing components. As a rule, I generally recommend cooling to the processor, then the GPU(s), and finally to the chipset if you use a chipset cooler. This allows the most critical components to get the coolest water running through the system. The added reservoir will keep the volume of water at a level where it can be reasonably cooled before being recirculated through the system. Some may argue the order of cooled components, but I've found that this method always gives exceptional results and allows for good overclocking over air.Old age and treachery will overcome youth and skill
My Toys
Comment
-
Re: Liquid Cooling
http://www.newegg.com/Product/Produc...82E16835118119
this is what i have and its pretty good for overclocking. if you want to overclock w/e you want to the max, i suggest that you go with water cooling. and of you want to overclock a little go for a good heatsink.
Comment
-
Re: Liquid Cooling
If you want cheap, get a Thermalright XP-90 and a decent fan. That will outperform all cheap all in one water setups and almost every other heatsink on the market. If you go water, listen to Darthtanion. 1/2" ID or larger is the only way to go. I had a setup with 1/2" OD tubing and my XP-90 outperforms it. You may even want to wait for a few months as OCZ is threatening to put out Phase CHange unit for under $300. That is the ultimate in cooling.GIgabyte GA-990FXA-UD3
AMD FX8120 @ 4GHz
Patriot 1866MHz EL series 2X4GB DDR3
Powercolour HD 6970 2GB w/XFX 8800GT 512MB Hybrid PhysX
Creative X-FI titanium HD w/Technics class A 300W amp and tower speakers
PC P&C 500W PSU
2TB Seagate
Coolermaster 690II w/Corsair H100 tucked under the hood
Comment
Comment