Tweet
new PC-Q25B I have SATA Backplane
Hello
With my new PC-Q25B I have SATA Backplane problem:
Using two different SATA power cables. No disks are detected!
Using Molex cable with midde & low molex connector: 2 disk (the 8 TB disks) of 4 are detected. Using Top port with Molex does not detect SATA 3 & SATA 4.
Environment:
Corsair SFX 450W Gold
Mainboard: Asus P10S-I
RAM 16 GB Kingston
CPU intel i3-7100 Kaby Lake
Naming Convention: Lowest SATA Port on the Backplane is SATA 0 + Molex
Disk 1 on 1st SATA Port: WD Red 8 TB
Disk 2 on 2nd SATA Port: WD Red 8 TB
Disk 3 on 3rd SATA Port: WD Red 10 TB
Disk 4 on 4th SATA Port: WD Red 10 TB
Thank you very much for your help!
With my new PC-Q25B I have SATA Backplane problem:
Using two different SATA power cables. No disks are detected!
Using Molex cable with midde & low molex connector: 2 disk (the 8 TB disks) of 4 are detected. Using Top port with Molex does not detect SATA 3 & SATA 4.
Environment:
Corsair SFX 450W Gold
Mainboard: Asus P10S-I
RAM 16 GB Kingston
CPU intel i3-7100 Kaby Lake
Naming Convention: Lowest SATA Port on the Backplane is SATA 0 + Molex
Disk 1 on 1st SATA Port: WD Red 8 TB
Disk 2 on 2nd SATA Port: WD Red 8 TB
Disk 3 on 3rd SATA Port: WD Red 10 TB
Disk 4 on 4th SATA Port: WD Red 10 TB
Thank you very much for your help!