Originally posted by Yuri Mikiryan
View Post
My pc (with the i7-920 processor ) started properly as well and boot to windows without any issue.
So restart again and BIOS once again. Then I've noticed 2 things, the whole bios interface in my case ,i don't know if you faced that as well, was a bit slower than usual, a bit laggy i should say, i had to press escape sometimes 2-3 times to return to main menu or press enter to a menu and wait a few seconds etc.
The second one had to do with overclocking.Now i am on FH version with OC to 3.6Ghz,so i used the exact same parameters on FK version.The result was the same with my first bios,the FB version.Error message that i had no proper shutdown due to voltage changes and return to default settings.So no OC.
Tomorrow i will try replacing the i7 with the Xeon X5675 with FH bios to see if it will work, if not...i am gonna put back i7 flash to FK without changing anything to bios and replace the processor and judginf from your post that will work.
Just for the feedback i will let you know. It would be great if FH work with Xeon to avoid the whole switching again but no high hopes.I think i finally i had to move to FK.
Leave a comment: