This was not happening on F11 stable but I just flashed F12 stable on the week start, I don't experiment the things I don't understand so these were the things I changes in bios as soon as I updated
- Enabled PBO
- Enabled XMP
- Enabled 4G decoding
- Enabled Re-Size bar (AUTO)
- Enabled Ultrafast Boot
1) I didn't realize till today just before flashing F13a that I couldn't enter BIOS
- Tried entering from CHANGE FIRMWARE SETTINGS in ADVANCED BOOT MENU (SHIFT + RESTART)
- Tried From APP CENTER => Fast boot => Enter BIOS
- Turned off fast boot and clicked on ENTER BIOS no success (Here's when I noticed that the VGA LED on motherboard was on all along! I don't know why! ) The monitor doesn't detect any signal from HDMI until windows loads up.
2) After seeing the VGA LED on I still proceeded to flash F13a, after flashing from the APP CENTER I was able to enter into the BIOS the FIRST BOOT AFTER FLASH! And I made the same changes as I did above & the issue still persists!
So 2 problems I cant enter BIOS & the VGA LED is in RED state for I don't know what reason, the PC is stable enough to edit videos, render, gaming and other things the only problem are the ones I mentioned before. And there are no beeps! Previously on F11 I usually heard 11 beeps on boot up, but on F12 & F13a no beeps.
This is the first time I'm posting here, so I'm sorry if I have violated any post rules or something else, The VGA RED STATE & not able to boot into BIOS are driving me mad I will be thankful for any help I receive.
Thanks again.
My system specification:
- Enabled PBO
- Enabled XMP
- Enabled 4G decoding
- Enabled Re-Size bar (AUTO)
- Enabled Ultrafast Boot
1) I didn't realize till today just before flashing F13a that I couldn't enter BIOS
- Tried entering from CHANGE FIRMWARE SETTINGS in ADVANCED BOOT MENU (SHIFT + RESTART)
- Tried From APP CENTER => Fast boot => Enter BIOS
- Turned off fast boot and clicked on ENTER BIOS no success (Here's when I noticed that the VGA LED on motherboard was on all along! I don't know why! ) The monitor doesn't detect any signal from HDMI until windows loads up.
2) After seeing the VGA LED on I still proceeded to flash F13a, after flashing from the APP CENTER I was able to enter into the BIOS the FIRST BOOT AFTER FLASH! And I made the same changes as I did above & the issue still persists!
So 2 problems I cant enter BIOS & the VGA LED is in RED state for I don't know what reason, the PC is stable enough to edit videos, render, gaming and other things the only problem are the ones I mentioned before. And there are no beeps! Previously on F11 I usually heard 11 beeps on boot up, but on F12 & F13a no beeps.
This is the first time I'm posting here, so I'm sorry if I have violated any post rules or something else, The VGA RED STATE & not able to boot into BIOS are driving me mad I will be thankful for any help I receive.
Thanks again.
My system specification:
Motherboard: | ||||
CPU Type | OctalCore AMD Ryzen 7 5800X, 4841 MHz (48.5 x 100) | |||
Motherboard Name | Gigabyte B550 Aorus Pro AC (2 PCI-E x1, 3 PCI-E x16, 2 M.2, 4 DDR4 DIMM, Audio, Video, 2.5GbE LAN, WiFi) | |||
Motherboard Chipset | AMD B550, AMD K17.7 FCH, AMD K17.7 IMC | |||
System Memory | 32715 MB | |||
DIMM1: Corsair Vengeance RGB Pro CMW32GX4M2C3200C16 | 16 GB DDR4-3200 DDR4 SDRAM (24-18-18-36 @ 1600 MHz) (23-18-18-36 @ 1600 MHz) (22-18-18-36 @ 1600 MHz) (21-18-18-36 @ 1600 MHz) (20-18-18-36 @ 1600 MHz) (19-18-18-36 @ 1600 MHz) (18-18-18-36 @ 1600 MHz) (17-18-18-36 @ 1600 MHz) (16-18-18-36 @ 1600 MHz) (15-17-17-34 @ 1500 MHz) (14-16-16-32 @ 1400 MHz) (13-15-15-30 @ 1300 MHz) (12-14-14-27 @ 1200 MHz) (11-13-13-25 @ 1100 MHz) (10-12-12-23 @ 1000 MHz) (9-11-11-21 @ 900 MHz) (8-9-9-18 @ 800 MHz) (7-8-8-16 @ 700 MHz) | |||
DIMM2: Corsair Vengeance RGB Pro CMW32GX4M2C3200C16 | 16 GB DDR4-3200 DDR4 SDRAM (24-18-18-36 @ 1600 MHz) (23-18-18-36 @ 1600 MHz) (22-18-18-36 @ 1600 MHz) (21-18-18-36 @ 1600 MHz) (20-18-18-36 @ 1600 MHz) (19-18-18-36 @ 1600 MHz) (18-18-18-36 @ 1600 MHz) (17-18-18-36 @ 1600 MHz) (16-18-18-36 @ 1600 MHz) (15-17-17-34 @ 1500 MHz) (14-16-16-32 @ 1400 MHz) (13-15-15-30 @ 1300 MHz) (12-14-14-27 @ 1200 MHz) (11-13-13-25 @ 1100 MHz) (10-12-12-23 @ 1000 MHz) (9-11-11-21 @ 900 MHz) (8-9-9-18 @ 800 MHz) (7-8-8-16 @ 700 MHz) | |||
BIOS Type | AMI (01/27/2021) | |||
Display: | ||||
Video Adapter | GeForce RTX 3070 (8 GB) | |||
Video Adapter | GeForce RTX 3070 (8 GB) | |||
Video Adapter | GeForce RTX 3070 (8 GB) | |||
Video Adapter | GeForce RTX 3070 (8 GB) | |||
3D Accelerator | nVIDIA GeForce RTX 3070 | |||
Monitor | Dell S2218H (HDMI) [21.5" IPS LCD] (RYF377AV2BHB) |
Comment