No announcement yet.

Cannot use XMP profile with Thunderbolt card installed on Threadripper 3960X

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cannot use XMP profile with Thunderbolt card installed on Threadripper 3960X

    Hello All,

    I've got a threadripper 3960X installed into a Gigabyte Aorus Xtreme with 32GB (4x16gb) of Trident Z Royal RAM. I've also got a Gigabyte Titan Ridge Thunderbolt card installed. With this card installed, I cannot use the XMP profile as the computer will not post. If I unplug the card, it boots normally with the XMP profile. If I DO NOT use the XMP profile and the card is installed, everything works as it should and boots into Windows. I've tried to input manual timings into BIOS using Thaiphoon and DRAM Calculator for Ryzen v1.7, but there are fields missing from the calculator that are present when attempting to adjust my DRAM in BIOS.

    This is my first computer build, so it's all a little confusing to me. I'm just looking to overclock the ram to get a little more performance out of the 3960X. Any help would be greatly appreciated!

    See attached photos from DRAM Calculator


    Here's the report from Thaiphoon:

    Prepared by Thaiphoon Burner Super Blaster
    -------------------------------------------------------------
    MEMORY MODULE
    -------------------------------------------------------------
    Manufacturer : G.Skill
    Series : Trident Z Royal Silver
    Part Number : F4-3600C16-8GTRSC
    Serial Number : Undefined
    JEDEC DIMM Label : 8GB 1Rx8 PC4-2133-UA1-11
    Architecture : DDR4 SDRAM UDIMM
    Speed Grade : DDR4-2133
    Capacity : 8 GB (8 components)
    Organization : 1024M x64 (1 rank)
    Register Manufacturer : N/A
    Register Model : N/A
    Manufacturing Date : Undefined
    Manufacturing Location : Taipei, Taiwan
    Revision / Raw Card : 0000h / A1 (10 layers)
    -------------------------------------------------------------
    DRAM COMPONENTS
    -------------------------------------------------------------
    Manufacturer : Hynix
    Part Number : H5AN8G8NDJR-TFC
    Package : Standard Monolithic 78-ball FBGA
    Die Density / Count : 8 Gb D-die (Davinci / 17 nm) / 1 die
    Composition : 1024Mb x8 (64Mb x8 x 16 banks)
    Input Clock Frequency : 1067 MHz (0.938 ns)
    Minimum Timing Delays : 15-15-15-36-50
    Read Latencies Supported : 16T, 15T, 14T, 13T, 12T, 11T, 10T
    Supply Voltage : 1.20 V
    XMP Certified : 1802 MHz / 16-19-19-39-58 / 1.35 V
    XMP Extreme : Not programmed
    SPD Revision : 1.1 / September 2015
    XMP Revision : 2.0 / December 2013
    -------------------------------------------------------------
    THERMAL SENSOR
    -------------------------------------------------------------
    Manufacturer : OnSemi
    Model : N34TS04
    Revision : 30h
    Sensor Status : Enabled
    EVENT Output Control : Disabled
    Temperature Accuracy : B-Grade
    Temperature Resolution : 0.0625 °C (12-bit ADC)
    Current Temperature : 34.000 °C / 93.200 °F
    Negative Measurements : Supported
    Interrupt Capability : Supported
    -------------------------------------------------------------
    SOURCE SPD DUMP
    -------------------------------------------------------------
    000 23 11 0C 02 85 21 00 08 00 60 00 03 01 03 00 00
    010 00 00 08 0D F8 03 00 00 6E 6E 6E 11 08 76 F0 0A
    020 20 08 00 05 00 A8 1E 2B 2E 00 78 00 14 3C 00 00
    030 00 00 00 00 00 00 00 00 00 00 00 00 16 36 16 36
    040 16 36 16 36 00 00 16 36 16 36 16 36 16 36 00 00
    050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    070 00 00 00 00 00 83 B5 CE 00 00 00 00 E7 C2 2D 24
    080 11 11 20 00 00 00 00 00 00 00 00 00 00 00 00 00
    090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1C A0
    100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    140 04 CD 00 00 00 00 00 00 00 46 34 2D 33 36 30 30
    150 43 31 36 2D 38 47 54 52 53 43 00 00 00 00 80 AD
    160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8E CF
    180 0C 4A 05 20 00 00 00 00 00 A3 00 00 05 00 02 00
    190 00 47 54 54 10 AD 01 F0 0A 20 08 00 05 00 C0 11
    1A0 27 00 00 00 00 00 00 00 00 E6 A0 BE D2 D2 FA BA
    1B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    1C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    1D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    1E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    1F0 01 02 01 00 00 00 00 00 00 00 00 00 00 00 00 00
    Attached Files
Working...
X